Skip to content

GuWin Fire and EMS Frequencies

We do not have frequencies listed specifically for GuWin in Fayette County, Alabama yet. Countywide channels for Fayette County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Phillips Mountain (Alabama Interoperable Radio System (AIRS)), about 33 miles away.

About GuWin Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers GuWin: Fayette County Fire 159.1350 MHz, narrow FM, 167.9 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN96), which needs a scanner that decodes that mode.

Data updated .

Fayette County channels that also cover GuWin

Fire Dispatch

Fire Dispatch frequencies for Fayette County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fayette County FirePublic Safety E (analog)159.1350
In 150.7900
167.9 PLFMNWPGM332
Fayette County FirePublic Safety E (digital)159.1350
In 150.7900
RAN 11NXDN96WPGM332
Fayette County FireFayette County Fire – Dispatch453.2000
In 458.2000
071 DPLFMNWNLL524

Hospitals & Medical

Hospitals & Medical frequencies for Fayette County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fayette County HospitalFayette Medical Center – Patient Reports155.340082.5 PLFMNWQPY557

Nearest trunked radio sites

Distances are measured from the center of GuWin.

Phillips Mountain · Alabama Interoperable Radio System (AIRS)
RFSS 5 · Site 8 (hex 8) · NAC 468 · about 33 mi away
Control 769.76875, 770.01875
Voice 769.11875, 769.36875
Northport · Alabama Interoperable Radio System (AIRS)
RFSS 5 · Site 6 (hex 6) · NAC 466 · about 40 mi away
Control 771.48125, 771.85625
Voice 770.14375, 770.75625, 771.23125, 773.38125, 773.63125
Centreville · Alabama Interoperable Radio System (AIRS)
RFSS 4 · Site 37 (hex 25) · NAC 467 · about 42 mi away
Control 771.53125, 771.78125
Voice 771.05625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in GuWin?

We do not have a fire dispatch channel listed specifically for GuWin. The county-level fire dispatch channels in the same county: Fayette County Fire 159.1350 MHz, narrow FM, 167.9 PL.

What scanner do I need to listen to fire and EMS in GuWin?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN96 is needed for the digital conventional channels.

What are the control channels for trunked radio in GuWin?

For GuWin, start with the Phillips Mountain site of Alabama Interoperable Radio System (AIRS). Its control channels are 769.76875, 770.01875 MHz. Program a control channel first; the scanner finds the voice channels from it.