Skip to content

Scanner Guides

How scanners, trunked systems, paging tones and fire and EMS radio work, in plain English.

Short, plain-English explanations of the things the frequency tables only list: how trunked systems work, what the codes mean, and how to set up your scanner.

What Do RFSS, Site, NAC and Talkgroup Mean?

On a Project 25 trunked radio system, the site is one tower location, the RFSS is a group of sites, the NAC is a code the site transmits, and a talkgroup is a virtual channel. You program the control channels first and then pick talkgroups.

Updated

How Fire and EMS Paging Works: Tone-Outs Explained

A tone-out is a short burst of audible tones that alerts one fire department or ambulance crew, followed by a voice message. Volunteer departments rely on them, so the channel is silent until a call. Most scanners play the tones as beeps and cannot pick out one department's tones.

Updated

Fire Mutual Aid and Interoperability Channels Explained

A mutual aid or interoperability channel is a shared channel that lets crews from different departments or agencies talk to each other at a large incident. Some are national, some are set by the state or region, and many are left unencrypted for that reason.

Updated

Encrypted Fire and EMS Radio: What the Enc Badge Means

An Enc badge means the audio is scrambled so only radios with the right key can understand it. A scanner receives the signal but can't turn it into speech, so encrypted channels are listed for completeness and can't be monitored.

Updated

Why Is My Fire Scanner Channel Quiet? (It Usually Isn't Broken)

A quiet fire channel is usually normal. Volunteer departments are paged by tones and only use the radio during calls, fireground channels are silent until an incident, and a small department may have only a few calls a week. Check the listing's status badge and your settings before assuming it is broken.

Updated

Why a Fire or EMS Frequency Stopped Working

The usual reasons are that the department moved to a trunked or digital system, encrypted the channel, kept the frequency only as a backup, or your scanner settings no longer match. Check the listing's status badge first.

Updated