The short version
Trunked radio systems share a pool of frequencies among many agencies. A listing for one gives you a handful of numbers, and each answers a different question:
| Number | What it answers | Where it goes in your scanner |
|---|---|---|
| Control channel | Where do I listen first? | The frequency list of the system or site |
| Site | Which tower am I receiving? | Site settings (often only a label) |
| RFSS | Which group of sites is this site in? | Usually informational |
| NAC | Which system does this signal belong to? | Left on automatic for most listeners |
| Talkgroup | Which conversation do I want to hear? | The talkgroup list, as a decimal or hex number |
These identifiers are part of the Project 25 (P25) standard, TIA-102, and are broadcast over the air by the system itself. They are not numbers invented by a website or a database.
A worked example
Here is how a site is shown on a county page, using the Dothan Simulcast site of the Alabama Interoperable Radio System as it appears on our Houston County, Alabama page:
Reading it from left to right:
- Dothan Simulcast is the name of the tower location. Its coverage is the area around Dothan.
- RFSS 6 says the site belongs to the sub-system numbered 6 inside the statewide system.
- Site 1 (hex 1) is the site's own number, shown in decimal and hex because scanners differ. Here they happen to match.
- NAC 460 is the access code this site transmits.
- The four control channels are the frequencies your scanner listens to first. Any one of them can be the active control channel at a given moment.
A talkgroup on the same page looks like this: 60261 (hex eb65), described as Dothan Fire - Primary. That is the number you add to your talkgroup list to hear that fire dispatch traffic.
Control channel and voice channels
A trunked site uses one frequency as a control channel. It sends out a constant stream of data telling radios which voice frequency a call is on. The other frequencies, listed as voice channels, carry the calls themselves.
Your scanner only needs the control channels. When it decodes the control channel, it learns where each call is and jumps to it, then returns. If you only remember one thing, remember this: program the control channel first.
Site
A big system is made of many towers. Each tower is a site with its own number and its own set of frequencies. Two things follow from this:
- Your scanner should be set to the site that reaches your location. On a county page, the site cards name the area each site covers.
- The same talkgroup is usually heard on every site that carries it, so you only choose the tower, not the conversation.
Sites are numbered in decimal and in hex. A scanner or its programming software asks for one or the other. We list both so you never have to convert.
RFSS
RFSS stands for Radio Frequency Sub-System. It is a group of sites run by the same controller. A small system has one RFSS. A large statewide system may have several, which is why you see RFSS 6 above.
For listening, the RFSS number is mostly informational. It becomes useful when two sites in different groups carry the same site number, or when you need to tell sites apart in programming software.
NAC
NAC stands for Network Access Code. It is a three-character hex code, from 000 to FFF, that a P25 site includes in every transmission. A receiver can use it to ignore signals from other systems on the same frequency.
Most scanners can be left on automatic (often shown as "Srch" or "Any") and will decode any NAC. Set a specific NAC only if two systems share a frequency near you and you keep hearing the wrong one. If a listing shows a NAC, it is the value to use when you do.
Talkgroup
A talkgroup is a virtual channel. Instead of one frequency per agency, a trunked system gives each agency, and each purpose within it, a talkgroup number. When a fire dispatcher keys up on the dispatch talkgroup, the system picks a free voice frequency and tells every radio in that talkgroup where to go.
- A talkgroup number is a decimal number up to 65535. It has an equivalent in hex, such as 60261 and eb65.
- You choose the talkgroups you want to hear. Everything else on the system is ignored.
- A talkgroup marked with an Enc badge is encrypted and can't be heard on a scanner. See the guide to encrypted fire and EMS radio.
- Fire departments and EMS agencies in the same area often share one system, each with its own dispatch and tactical talkgroups.
Where to enter each number
- Create the system in your scanner, with the right system type (P25 Phase I, Phase II, or the type shown).
- Add the site, and enter its control channels as frequencies in MHz.
- Leave NAC on automatic unless you have a reason to set it.
- Add the talkgroups you want, as decimal or hex depending on your scanner.
For the full walk-through, read how to program a trunked system.
Frequently asked questions
Are these numbers the same as the IDs on other websites?
No. RFSS, site, NAC and talkgroup numbers are defined by the radio system and transmitted over the air. They are the same wherever you see them listed. Database record numbers on other sites are a different thing and are not used by radios.
Do I need to enter the RFSS or the NAC?
Usually not. Control channels and talkgroups are what you must enter. RFSS is informational for most listeners, and the NAC can normally stay on automatic.
Why is a number shown in both decimal and hex?
Scanners and programming software disagree about which to use, and a wrong guess means you listen to the wrong talkgroup. Showing both avoids converting by hand.
Is a talkgroup the same as a channel?
It behaves like one. The difference is that a talkgroup is not tied to a frequency. The system assigns a free voice frequency for each call.