The short version
A fire department rarely uses one channel for everything. Most use at least two kinds:
- Dispatch. The dispatcher sends crews to calls, gives the address and nature of the call, and keeps track of units. This is the channel most listeners want first.
- Fireground, tactical or "tac." Once crews are on scene, they move to another channel so the dispatch channel stays free. Firefighters, officers and the incident commander talk to each other there.
- Talk-around. A channel for radios to talk directly to each other without going through a repeater, for short range use on or near the scene.
EMS follows the same pattern: a dispatch channel for ambulance calls, a tactical channel for crews working an incident, and a separate channel for talking to the hospital.
How this site labels them
Listings are grouped under these headings, so you can tell at a glance what a channel is for:
| Heading | What it means |
|---|---|
| Fire Dispatch | The dispatch channels and talkgroups for fire departments and districts |
| Fire Ground / Tactical | Fireground and tactical channels used on scene |
| Fire Talk-around | Direct, radio-to-radio channels |
| EMS Dispatch | Dispatch for ambulance and EMS agencies |
| EMS Tactical | Channels EMS crews use on scene |
| EMS Talk-around | Direct, radio-to-radio EMS channels |
| Hospitals & Medical | Channels used to talk to hospitals, such as ambulance-to-hospital patient reports |
The label comes from how the channel is classified in the source data and from its description, so some channels are named in the department's own way, such as "Fire Ground," "Operations" or "Tac 2."
Which one should I listen to?
- Start with dispatch. It is the busiest channel and tells you what is happening and where. In most places there is one dispatch channel for a whole county, shared by every fire department in it.
- Add the fireground channels for your area if you want to hear the action on a working fire. They are usually silent until an incident, and then they are busy.
- Add EMS dispatch if you want ambulance calls. In many places it is on a different channel from fire, and sometimes it is encrypted. See encrypted fire and EMS radio.
Why you often hear "go to tac 2"
Dispatch tells a crew which tactical channel to use for an incident, for example "Engine 12, switch to Tac 2." That keeps the dispatcher free to handle the next call. If you only listen to dispatch, you hear the instruction but not what happens next. To follow a fire from dispatch to the scene, add the fireground channels for the same department, or the same county.
Conventional or trunked
Where a department uses a conventional system, each of these is a separate frequency. Where it uses a trunked system, each is a talkgroup on the same system. The idea is the same, but on a trunked system you add the dispatch and fireground talkgroups to one system instead of tuning separate frequencies. See conventional, trunked and digital and how to program a trunked system.
Mutual aid
When a fire is too big for one department, neighbouring departments are called in. They often use a shared mutual aid or interoperability channel, so crews from different departments can talk to each other. See mutual aid and interoperability channels.
Frequently asked questions
What is a fireground channel?
A channel that firefighters use on scene, separate from the dispatch channel. It is also called a tactical or tac channel.
Why is the fireground channel quiet?
Because crews only use it during an incident. Most of the time there is nothing to hear. See why a fire channel is quiet.
Do all departments have a separate fireground channel?
No. A small department may use one channel for dispatch and for operations, or share a countywide tactical channel with neighbouring departments.
Why can I hear the dispatcher but not the firefighters?
The firefighters have probably moved to a fireground channel that you have not programmed, or to a channel that is encrypted.