Skip to content

Fire Mutual Aid and Interoperability Channels Explained

A mutual aid or interoperability channel is a shared channel that lets crews from different departments or agencies talk to each other at a large incident. Some are national, some are set by the state or region, and many are left unencrypted for that reason.

The short version

When a fire is too big for one department, crews from neighbouring departments arrive. They are on different radio systems and different channels, so a shared channel is needed for them to talk to each other. That is a mutual aid or interoperability channel.

On this site you will see these channels labelled with names such as "Fire Mutual Aid," "Interop," or the name of the regional mutual aid system.

Kinds of shared channels

KindWhat it is
Regional mutual aid systemsNeighbouring departments agree to send help to each other, and use a set of channels and a dispatch plan. An example is MABAS, the Mutual Aid Box Alarm System, which is organised in numbered divisions.
State fire mutual aid channelsA channel or talkgroup that a state sets aside for fire departments across the state to use at large incidents.
National interoperability channelsA set of channels with standard names, kept for any agency to use with any other. The names include VFIRE, VTAC, UTAC and 8TAC.
Interop talkgroups on trunked systemsA shared talkgroup on a trunked system that several agencies can use.

The national channels and their frequencies are listed in a guide called the National Interoperability Field Operations Guide, which the US Cybersecurity and Infrastructure Security Agency publishes.

Why they matter to a listener

  • They are usually unencrypted. The point of an interoperability channel is that anyone responding can use it, so agencies tend to leave it in the clear even when their own channels are encrypted.
  • They carry big incidents. A working structure fire, wildfire, hazmat call or mass-casualty incident often brings mutual aid, and you can hear it on the shared channel.
  • They are often patched. Dispatch centres sometimes patch a department's channel to a mutual aid channel, so the same call is heard on both. Listings on this site mark these as "Patch".

How to find them

  • Look at the Fire Ground / Tactical and Fire Talk-around sections of a county page. Mutual aid channels are grouped with them.
  • Look at the county's neighbours. A mutual aid channel is shared between departments, so it may be listed under the county that dispatches it rather than the one you are in. City pages show "county channels that also cover" the city for this reason.
  • On a trunked system, look for talkgroups with "Mutual Aid," "Interop," or "Common" in the name.

What you hear on them

Mostly short messages between crews and a command post: who is on scene, what they need, and where to stage. There may be long periods of silence, because these channels are only used during an incident. See why a fire channel is quiet.

Wildland and state agencies

Wildland fire is handled by state forestry agencies and federal land agencies, who have their own channels, including air-to-ground channels used with aircraft. Listings for these agencies appear on the state page, because they cover the state as a whole.

Frequently asked questions

What is a mutual aid channel?

A shared channel that lets crews from different fire departments talk to each other at an incident.

Are mutual aid channels encrypted?

Usually not, because they exist so that agencies who don't share a radio system can talk. Some are encrypted, and this site marks those with an Enc badge.

What does VFIRE mean?

It is the name of a national interoperability channel kept for fire services. The full set of national channels is in the National Interoperability Field Operations Guide.

Why do I hear the same call on two channels?

The dispatch centre may have patched the two channels together, so the call is heard on both.