About Eagle Point Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Eagle Point: Cahaba Valley Fire and EMS 154.4000 MHz, narrow FM, 156.7 PL. Trunked: Alabama Interoperable Radio System (AIRS), for example Shelby County Fire / EMA talkgroup 2953 (hex b89).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Alabama Interoperable Radio System (AIRS): 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Eagle Point, start with the Hoover (Greystone) site of Alabama Interoperable Radio System (AIRS), about 3 miles away. Its control channels: 769.58125, 771.40625 MHz.
Data updated .
Shelby County channels that also cover Eagle Point
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cahaba Valley Fire and EMS | Fire/EMS Dispatch | 154.4000 In 151.1150 | 156.7 PL | FMN | KNFA343 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Shelby County Hospital | Shelby Medical Center – Patient Reporets | 155.3400 | 103.5 PL | FMN | WQOK944 |
Alabama Interoperable Radio System (AIRS)
System ID 00A
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Shelby County Fire / EMA | Shelby County Fire / EMA – Dispatch – East | 2953 | b89 | D |
| Shelby County Fire / EMA | Shelby County Fire / EMA – Dispatch – North | 2955 | b8b | D |
| Shelby County Fire / EMA | Shelby County Fire / EMA – Dispatch – West | 2957 | b8d | D |
| Shelby County Fire / EMA | Shelby County Fire / EMA – Dispatch – Southwest | 2959 | b8f | D |
| Shelby County Fire / EMA | EMA – Tactical | 2891 | b4b | D |
| Shelby County Fire / EMA | EMA – Primary | 2923 | b6b | D |
| Shelby County Interop (Countywide) | Shelby County Interop (Countywide) – Operations | 2939 | b7b | D |
| Shelby County Interop (Countywide) | Shelby County Interop (Countywide) – Operations | 2941 | b7d | D |
| Shelby County Interop (Countywide) | Shelby County Interop (Countywide) – Operations | 2943 | b7f | D |
| Shelby County Interop (Countywide) | Shelby County Interop (Countywide) – Operations | 2945 | b81 | D |
Nearest trunked radio sites
Distances are measured from the center of Eagle Point.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Eagle Point?
We do not have a fire dispatch channel listed specifically for Eagle Point. The county-level fire dispatch channels in the same county: Cahaba Valley Fire and EMS 154.4000 MHz, narrow FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Eagle Point?
Yes. The county-level systems that cover Eagle Point are Fire and EMS talkgroups are listed for Alabama Interoperable Radio System (AIRS): 10 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Eagle Point?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Eagle Point?
For Eagle Point, start with the Hoover (Greystone) site of Alabama Interoperable Radio System (AIRS). Its control channels are 769.58125, 771.40625 MHz. Program a control channel first; the scanner finds the voice channels from it.