Skip to content

Mill Bay Fire and EMS Frequencies

We do not have frequencies listed specifically for Mill Bay in Kodiak Island Borough, Alaska yet. Countywide channels for Kodiak Island Borough that may also cover this area are shown below when we have them. The closest trunked radio site we have is Kodiak Pillar Mtn (Alaska Land Mobile Radio (ALMR)), about 3 miles away.

About Mill Bay Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Mill Bay: USCG Fire 172.3125 MHz, narrow FM, 250.3 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Kodiak Island Borough channels that also cover Mill Bay

Fire Dispatch

Fire Dispatch frequencies for Kodiak Island Borough
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kodiak Island GovernmentKodiak Island Government – Dispatch (Encrypted)155.5500NAC 184P25 EncryptedWQEV459
USCG FireUSCG Fire – Dispatch172.3125250.3 PLFMN—

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Kodiak Island Borough
AgencyDescriptionFrequency (MHz)ToneModeFCC
Kodiak Island GovernmentTactical White154.4450156.7 PLFMNWQEV459
Kodiak Island GovernmentTactical Orange154.9800FMNWPHH607
Kodiak Island GovernmentTactical Blue155.0550FMNWPHH607

Nearest trunked radio sites

Distances are measured from the center of Mill Bay.

Kodiak Pillar Mtn · Alaska Land Mobile Radio (ALMR)
RFSS 1 · Site 52 (hex 34) · NAC 140 · about 3 mi away
Control 154.65, 155.4
Voice 155.1, 155.625, 156.125
Kodiak Womans Bay · Alaska Land Mobile Radio (ALMR)
RFSS 1 · Site 46 (hex 2E) · NAC 140 · about 9 mi away
Control 155.6125, 156.05
Voice 154.6875, 154.8375, 155.4625
Seldovia · Alaska Land Mobile Radio (ALMR)
RFSS 1 · Site 32 (hex 20) · NAC 145 · about 116 mi away
Control 154.6625, 154.8125
Voice 156.0375, 156.1875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Mill Bay?

We do not have a fire dispatch channel listed specifically for Mill Bay. The county-level fire dispatch channels in the same county: USCG Fire 172.3125 MHz, narrow FM, 250.3 PL.

What scanner do I need to listen to fire and EMS in Mill Bay?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Mill Bay?

For Mill Bay, start with the Kodiak Pillar Mtn site of Alaska Land Mobile Radio (ALMR). Its control channels are 154.65, 155.4 MHz. Program a control channel first; the scanner finds the voice channels from it.