About Jerusalem Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Jerusalem: Conway County Fire 453.1875 MHz, DMR, CC 8 · TG * · SL 1. County-level ems dispatch that covers Jerusalem: Conway County EMS 453.1250 MHz, DMR, CC 9 · TG * · SL 1.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 4 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Conway County channels that also cover Jerusalem
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Conway County Fire | Rural Fire – Primary – Hector | 453.1875 In 458.1875 | CC 8 · TG * · SL 1 | DMR | WPHU788 |
| Conway County Fire | Rural Fire – Primary – Hattieville | 453.4875 In 458.4875 | CC 8 · TG * · SL 1 | DMR | WPHU788 |
| Conway County Fire | Conway County Fire – Paging – White Oak | 453.6000 In 458.6000 | 261 DPL | FMN | WPHU788 |
| Conway County Fire | Conway County Fire – Paging – Petit Jean | 453.6000 In 458.6000 | 654 DPL | FMN | WPHU788 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Conway County Fire | Rural Fire – Tactical | 453.6000 In 458.6000 | CC 8 · TG 801 · SL 1 | DMR | WPHU788 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Conway County EMS | Med Tech EMS – Tactical | 453.1250 In 458.1250 | CC 9 · TG * · SL 1 | DMR | WPFV412 |
| Conway County EMS | Med Tech EMS – Dispatch | 453.1250 In 458.1250 | 031 DPL | FMN | WPFV412 |
Nearest trunked radio sites
Distances are measured from the center of Jerusalem.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Jerusalem?
We do not have a fire dispatch channel listed specifically for Jerusalem. The county-level fire dispatch channels in the same county: Conway County Fire 453.1875 MHz, DMR, CC 8 · TG * · SL 1.
What frequency does EMS or the ambulance service use in Jerusalem?
We do not have a EMS dispatch channel listed specifically for Jerusalem. The county-level EMS dispatch channels in the same county: Conway County EMS 453.1250 MHz, DMR, CC 9 · TG * · SL 1.
What scanner do I need to listen to fire and EMS in Jerusalem?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Jerusalem?
For Jerusalem, start with the Hector site of Arkansas Wireless Information Network (AWIN). Its control channels are 852.8125, 853.8125 MHz. Program a control channel first; the scanner finds the voice channels from it.