About Uniontown Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Uniontown: Crawford County Fire 154.0550 MHz, NXDN48, RAN 5. County-level ems dispatch that covers Uniontown: Crawford County EMS 155.1975 MHz, narrow FM, 100.0 PL.
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN48, NXDN96), which needs a scanner that decodes those modes.
Data updated .
Crawford County channels that also cover Uniontown
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Crawford County Fire | Crawford County Fire – District 1 | 154.0550 In 158.9250 | RAN 5 | NXDN48 | WPJQ612 |
| Crawford County Fire | Crawford County Fire – District 4 | 155.0850 | CSQ | FMN | WPRH498 |
| Crawford County Fire | Crawford County Fire – Mt. Gaylor | 155.1450 In 151.1450 | 100.0 PL | FMN | KKV836 |
| Crawford County Fire | Crawford County Fire – Pine Mountain (123.0 in) | 155.1450 In 151.1450 | 100.0 PL | FMN | KKV836 |
| Crawford County Fire | Crawford County Fire – Dean Springs | 155.1450 In 151.1450 | 100.0 PL | FMN | KKV836 |
| Crawford County Fire | Crawford County Fire – District 2 | 155.4300 | CSQ | FMN | WPRH498 |
| Crawford County Fire | Fire District Operations | 155.8725 | RAN 23 | NXDN96 | WRBN903 |
| Crawford County Fire | Crawford County Fire – District 3 | 158.8200 | CSQ | FMN | WPRH498 |
| Crawford County Fire | Boston Mountain Fire | 453.6375 In 458.6375 | 127.3 PL | FMN | WQMA262 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Crawford County EMS | Southwest EMS – Dispatch | 155.1975 In 153.8975 | 100.0 PL | FMN | WQGC593 |
Nearest trunked radio sites
Distances are measured from the center of Uniontown.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Uniontown?
We do not have a fire dispatch channel listed specifically for Uniontown. The county-level fire dispatch channels in the same county: Crawford County Fire 154.0550 MHz, NXDN48, RAN 5.
What frequency does EMS or the ambulance service use in Uniontown?
We do not have a EMS dispatch channel listed specifically for Uniontown. The county-level EMS dispatch channels in the same county: Crawford County EMS 155.1975 MHz, narrow FM, 100.0 PL.
What scanner do I need to listen to fire and EMS in Uniontown?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48, NXDN96 is needed for the digital conventional channels.
What are the control channels for trunked radio in Uniontown?
For Uniontown, start with the Pine Mountain (Cedarville) site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.3125, 857.6625 MHz. Program a control channel first; the scanner finds the voice channels from it.