Skip to content

Yarborough Landing Fire and EMS Frequencies

We do not have frequencies listed specifically for Yarborough Landing in Little River County, Arkansas yet. Countywide channels for Little River County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Yancy (Arkansas Wireless Information Network (AWIN)), about 15 miles away.

About Yarborough Landing Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Yarborough Landing: Little River County Fire 150.9950 MHz, DMR, CC 7 · TG 102 · SL *.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 4 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
  • 1 entry is marked expired, so it may no longer be in use.

Data updated .

Little River County channels that also cover Yarborough Landing

Fire Dispatch

Fire Dispatch frequencies for Little River County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Little River County FireLittle River County Fire – Ashdown Repeater (County150.9950CC 7 · TG 102 · SL *DMRWREJ423
Little River County FireLittle River County Fire – Miller Repeater (County)151.0850CC 7 · TG 102 · SL *DMRWREJ423
Little River County FireLittle River County Fire – Yarboro Repeater (County)151.4675
In 155.1075
CC 7 · TG 102 · SL 2DMRWREJ423
Little River County FireLittle River County Fire – Ashgrove Repeater (County)154.3100
In 158.7525
CC 7 · TG 102 · SL 2DMRWREJ423
Little River County FireLittle River County Fire – Dispatch155.7150
In 158.8650
FMNWNJC211

Hospitals & Medical

Hospitals & Medical frequencies for Little River County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Little River County Hospital Expired: Expired 11/23Little River Memorial Hospital155.2650FMNKNHW502

Nearest trunked radio sites

Distances are measured from the center of Yarborough Landing.

Yancy · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 20 (hex 14) · NAC 18D · about 15 mi away
Control 858.2125, 859.2125
Voice 851.4875, 853.5375, 853.8
New Boston (Texarkana) · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 67 (hex 43) · NAC 18E · about 20 mi away
Control 856.9875, 859.7625
Voice 854.5875, 857.5375, 857.9875, 858.9875, 859.4875
Hope · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 19 (hex 13) · NAC 180 · about 24 mi away
Control 852.1, 852.6
Voice 769.33125, 769.58125, 851.825, 857.4625, 859.1375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Yarborough Landing?

We do not have a fire dispatch channel listed specifically for Yarborough Landing. The county-level fire dispatch channels in the same county: Little River County Fire 150.9950 MHz, DMR, CC 7 · TG 102 · SL *.

What scanner do I need to listen to fire and EMS in Yarborough Landing?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Yarborough Landing?

For Yarborough Landing, start with the Yancy site of Arkansas Wireless Information Network (AWIN). Its control channels are 858.2125, 859.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.