Skip to content

Oneida Fire and EMS Frequencies

We do not have frequencies listed specifically for Oneida in Phillips County, Arkansas yet. Countywide channels for Phillips County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Barton (Arkansas Wireless Information Network (AWIN)), about 6 miles away.

About Oneida Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Oneida: Phillips County Fire 155.3100 MHz, narrow FM, no tone (expired). County-level ems dispatch that covers Oneida: Phillips County EMS 154.0550 MHz, narrow FM, 023 DPL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 entries are marked expired, so they may no longer be in use.

Data updated .

Phillips County channels that also cover Oneida

Fire Dispatch

Fire Dispatch frequencies for Phillips County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Phillips County Fire Expired: Expired 2/25Sheriff, OEM, Fire – Countywide155.3100
In 153.7475
FMNWPPW497

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Phillips County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Phillips County Fire Expired: Expired 2/25Sheriff, OEM, Fire – Countywide155.4300FMNWPPW497

EMS Dispatch

EMS Dispatch frequencies for Phillips County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Phillips County EMSPafford EMS – Dispatch154.0550
In 150.7550
023 DPLFMNWQHS511

Nearest trunked radio sites

Distances are measured from the center of Oneida.

Barton · Arkansas Wireless Information Network (AWIN)
RFSS 1 · Site 58 (hex 3A) · NAC 188 · about 6 mi away
Control 851.7625, 852.0625, 852.425, 853.1625
Voice 853.425
Preston Ferry (Casscoe) · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 25 (hex 19) · NAC 185 · about 31 mi away
Control 769.30625, 770.33125
Voice 771.03125, 771.60625, 772.10625
De Witt · Arkansas Wireless Information Network (AWIN)
RFSS 2 · Site 3 (hex 3) · NAC 184 · about 33 mi away
Control 851.05, 851.3375
Voice 851.625, 853.5125, 853.7625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Oneida?

We do not have a fire dispatch channel listed specifically for Oneida. The county-level fire dispatch channels in the same county: Phillips County Fire 155.3100 MHz, narrow FM, no tone (expired).

What frequency does EMS or the ambulance service use in Oneida?

We do not have a EMS dispatch channel listed specifically for Oneida. The county-level EMS dispatch channels in the same county: Phillips County EMS 154.0550 MHz, narrow FM, 023 DPL.

What scanner do I need to listen to fire and EMS in Oneida?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Oneida?

For Oneida, start with the Barton site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.7625, 852.0625, 852.425, 853.1625 MHz. Program a control channel first; the scanner finds the voice channels from it.