About Urbana Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Urbana: Union County Fire 154.1450 MHz, narrow FM, 77.0 PL. County-level ems dispatch that covers Urbana: Union County EMS 154.0925 MHz, DMR, CC 1 · TG 100200 · SL 1 (expired).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Union County channels that also cover Urbana
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Union County Fire | Union County Fire – Dispatch – Countywide | 154.1450 In 159.1350 | 77.0 PL | FMN | WSBU714 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Union County EMS Expired: Expired 3/22 | ProMed Ambulance | 154.0925 In 156.1275 | CC 1 · TG 100200 · SL 1 | DMR | WPEK564 |
Nearest trunked radio sites
Distances are measured from the center of Urbana.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Urbana?
We do not have a fire dispatch channel listed specifically for Urbana. The county-level fire dispatch channels in the same county: Union County Fire 154.1450 MHz, narrow FM, 77.0 PL.
What frequency does EMS or the ambulance service use in Urbana?
We do not have a EMS dispatch channel listed specifically for Urbana. The county-level EMS dispatch channels in the same county: Union County EMS 154.0925 MHz, DMR, CC 1 · TG 100200 · SL 1 (expired).
What scanner do I need to listen to fire and EMS in Urbana?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Urbana?
For Urbana, start with the Huttig site of Arkansas Wireless Information Network (AWIN). Its control channels are 851.975, 854.6375 MHz. Program a control channel first; the scanner finds the voice channels from it.