About Rover Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Rover: Yell County Fire 154.2950 MHz, narrow FM, 103.5 PL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
- 1 entry is marked expired, so it may no longer be in use.
Data updated .
Yell County channels that also cover Rover
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Yell County Fire | Yell County Fire – Rural Dispatch | 154.2950 In 159.0600 | 103.5 PL | FMN | WNXK754 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Yell County EMS Expired: Expired 4/24 | Yell County EMS – Tactical Channel (Dispatched on County Fire ) | 155.3850 In 150.7750 | CC 1 · TG 10 · SL 1 | DMR | WPGG860 |
Nearest trunked radio sites
Distances are measured from the center of Rover.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Rover?
We do not have a fire dispatch channel listed specifically for Rover. The county-level fire dispatch channels in the same county: Yell County Fire 154.2950 MHz, narrow FM, 103.5 PL.
What scanner do I need to listen to fire and EMS in Rover?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Rover?
For Rover, start with the Dutch Creek site of Arkansas Wireless Information Network (AWIN). Its control channels are 853.675, 853.925 MHz. Program a control channel first; the scanner finds the voice channels from it.