About Markleeville Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Markleeville: Alpine County Fire 153.8000 MHz, narrow FM, 107.2 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Alpine County channels that also cover Markleeville
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Alpine County Fire | Public Safety Repeater | 153.8000 In 154.1000 | 107.2 PL | FMN | KDX516 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Alpine County Fire | Public Safety Direct | 153.8000 | CSQ | FMN | KDX516 |
| Alpine County Fire | SAR Tactical | 155.1600 | CSQ | FMN | — |
Nearest trunked radio sites
Distances are measured from the center of Markleeville.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Markleeville?
We do not have a fire dispatch channel listed specifically for Markleeville. The county-level fire dispatch channels in the same county: Alpine County Fire 153.8000 MHz, narrow FM, 107.2 PL.
What scanner do I need to listen to fire and EMS in Markleeville?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Markleeville?
For Markleeville, start with the Leviathan Peak site of California Radio Interoperable System (CRIS). Its control channels are 151.1975, 151.4525 MHz. Program a control channel first; the scanner finds the voice channels from it.