About Hamilton City Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hamilton City: Glenn County Fire 154.4000 MHz, narrow FM, 100.0 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Glenn County channels that also cover Hamilton City
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Glenn County Fire | Glenn County Fire – Dispatch | 154.4000 In 158.8350 | 100.0 PL | FMN | WPMG314 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Enloe Medics and Westside Ambulance | Enloe Medics and Westside Ambulance | 463.0250 In 468.0250 | 141.3 PL | FMN | KNHG374 |
Nearest trunked radio sites
Distances are measured from the center of Hamilton City.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hamilton City?
We do not have a fire dispatch channel listed specifically for Hamilton City. The county-level fire dispatch channels in the same county: Glenn County Fire 154.4000 MHz, narrow FM, 100.0 PL.
What scanner do I need to listen to fire and EMS in Hamilton City?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Hamilton City?
For Hamilton City, start with the Simulcast site of Chico. Its control channels are 854.975, 855.75, 856.025 MHz. Program a control channel first; the scanner finds the voice channels from it.