About Furnace Creek Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Furnace Creek: South County Fire Dispatch 153.8750 MHz, narrow FM, 151.4 PL; Southern Inyo Fire Protection District 154.7250 MHz, FM, 85.4 PL. County-level ems dispatch that covers Furnace Creek: Symons Ambulance Co Dispatch / EMS-Hospital Net 154.3100 MHz, narrow FM, 136.5 PL.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Inyo County channels that also cover Furnace Creek
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| South County Fire Dispatch | South County Fire Dispatch (Owens Valley) | 153.8750 In 155.8800 | 151.4 PL | FMN | WNSV573 |
| Southern Inyo Fire Protection District | Southern Inyo Fire Protection District – Dispatch | 154.7250 | 85.4 PL | FM | WNMX297 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Olancha-Cartago Fire Department | Olancha-Cartago Fire Department – Tactical Channel | 154.4000 | CSQ | FM | — |
| Southern Inyo Fire Protection District | Southern Inyo Fire Protection District – Tactical Channel | 154.3400 | FM | — | |
| Southern Inyo Fire Protection District | Southern Inyo Fire Protection District – Tactical Channel | 154.4300 | FM | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Symons Ambulance Co Dispatch / EMS-Hospital Net | Symons Ambulance Co Dispatch / EMS-Hospital Net | 154.3100 | 136.5 PL | FMN | — |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Inyo County EMS 2 - Secondary | Inyo County EMS 2 – Secondary | 154.3775 In 159.0000 | CSQ | FMN | WQUH800 |
Nearest trunked radio sites
Distances are measured from the center of Furnace Creek.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Furnace Creek?
We do not have a fire dispatch channel listed specifically for Furnace Creek. The county-level fire dispatch channels in the same county: South County Fire Dispatch 153.8750 MHz, narrow FM, 151.4 PL; Southern Inyo Fire Protection District 154.7250 MHz, FM, 85.4 PL.
What frequency does EMS or the ambulance service use in Furnace Creek?
We do not have a EMS dispatch channel listed specifically for Furnace Creek. The county-level EMS dispatch channels in the same county: Symons Ambulance Co Dispatch / EMS-Hospital Net 154.3100 MHz, narrow FM, 136.5 PL.
What scanner do I need to listen to fire and EMS in Furnace Creek?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Furnace Creek?
For Furnace Creek, start with the Slate Mountain site of San Bernardino County. Its control channels are 853.6375, 860.1375 MHz. Program a control channel first; the scanner finds the voice channels from it.