Skip to content

Centerville Fire and EMS Frequencies

We do not have frequencies listed specifically for Centerville in Shasta County, California yet. Countywide channels for Shasta County that may also cover this area are shown below when we have them. The closest trunked radio site we have is South Fork Mountain VHF (California Radio Interoperable System (CRIS)), about 8 miles away.

About Centerville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Centerville: Co Fire Command 154.4300 MHz, narrow FM, 136.5 PL. County-level ems dispatch that covers Centerville: Shasta County EMS 462.9750 MHz, FM, 151.4 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Shasta County channels that also cover Centerville

Fire Dispatch

Fire Dispatch frequencies for Shasta County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Co Fire CommandCo Fire Command154.4300
In 159.0150
136.5 PLFMNKIU868

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Shasta County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Shasta County FireShasta County Fire – Tactical Channel153.9500CSQFMN—
Shasta County FireShasta County Fire – Tactical Channel154.0100CSQFMN—

EMS Dispatch

EMS Dispatch frequencies for Shasta County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Shasta County EMSShasta County EMS – Dispatch ("SHASCOM")462.9750
In 467.9750
151.4 PLFMWPMI997

Hospitals & Medical

Hospitals & Medical frequencies for Shasta County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mercy Medical CenterMercy Medical Center463.0750
In 468.0750
151.4 PLFMWDT370
Shasta County HospitalShasta Regional463.0250
In 468.0250
151.4 PLFMWQS902
Shasta County HospitalShasta Regional463.0500
In 468.0500
151.4 PLFMKYQ496

Nearest trunked radio sites

Distances are measured from the center of Centerville.

South Fork Mountain VHF · California Radio Interoperable System (CRIS)
RFSS 1 · Site 125 (hex 7D) · NAC 9D5 · about 8 mi away
Control 151.13, 154.6725, 155.3775
Voice 155.9025
Hoadley Peak · California Radio Interoperable System (CRIS)
RFSS 1 · Site 86 (hex 56) · NAC 9D6 · about 18 mi away
Control 154.9425, 155.46
Voice 154.7025, 155.655
Simulcast · Redding P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC B71 · about 22 mi away
Control 856.4375, 857.4375, 858.4375, 859.4375
Voice 854.0375, 854.1875, 855.7125, 856.7125, 856.9625, 857.9625, 858.9625, 859.9625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Centerville?

We do not have a fire dispatch channel listed specifically for Centerville. The county-level fire dispatch channels in the same county: Co Fire Command 154.4300 MHz, narrow FM, 136.5 PL.

What frequency does EMS or the ambulance service use in Centerville?

We do not have a EMS dispatch channel listed specifically for Centerville. The county-level EMS dispatch channels in the same county: Shasta County EMS 462.9750 MHz, FM, 151.4 PL.

What scanner do I need to listen to fire and EMS in Centerville?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Centerville?

For Centerville, start with the South Fork Mountain VHF site of California Radio Interoperable System (CRIS). Its control channels are 151.13, 154.6725, 155.3775 MHz. Program a control channel first; the scanner finds the voice channels from it.