About Alleghany Fire and EMS Frequencies
Quick answer: Fire dispatch for Alleghany: Alleghany VFD Fire 154.3850 MHz, narrow FM, 94.8 PL. County-level ems dispatch that covers Alleghany: Sierra County EMS 463.1750 MHz, narrow FM, 146.2 PL.
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Alleghany conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Alleghany VFD Fire | Alleghany Volunteer Fire Department Fire – Dispatch | 154.3850 | 94.8 PL | FMN | — |
Sierra County channels that also cover Alleghany
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike City VFD Fire | Pike City Volunteer Fire Department Fire – Dispatch | 158.9400 In 153.8750 | FMN | WQAJ536 | |
| Sierra County FPD | Sierra County Fire Protection District – Dispatch (East Side) | 154.3850 In 153.8900 | CSQ | FMN | WPZX778 |
| Truckee Meadows FPD Fire | Truckee Meadows Fire Protection District Fire – Dispatch | 158.7450 In 159.3900 | CSQ | FMN | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sierra County FPD | Sierra County Fire Protection District – Tactical Channel | 154.1750 | 351 DPL | FMN | WPZX778 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Truckee Meadows FPD Fire | Truckee Meadows Fire Protection District Fire – Tactical Channel | 158.8800 | CSQ | FMN | — |
| Truckee Meadows FPD Fire | Truckee Meadows Fire Protection District Fire – Tactical Channel | 158.9400 | CSQ | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sierra County EMS | Sierra County EMS – Dispatch (Loyalton) | 463.1750 In 468.1750 | 146.2 PL | FMN | KDD223 |
Nearest trunked radio sites
Distances are measured from the center of Alleghany.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Alleghany?
Fire dispatch channels listed for Alleghany: Alleghany VFD Fire 154.3850 MHz, narrow FM, 94.8 PL.
What frequency does EMS or the ambulance service use in Alleghany?
We do not have a EMS dispatch channel listed specifically for Alleghany. The county-level EMS dispatch channels in the same county: Sierra County EMS 463.1750 MHz, narrow FM, 146.2 PL.
What scanner do I need to listen to fire and EMS in Alleghany?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Alleghany?
For Alleghany, start with the Blue Canyon site of California Radio Interoperable System (CRIS). Its control channels are 770.20625, 770.94375, 773.54375, 773.81875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Alleghany fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Alleghany are marked encrypted.