About Gerber Fire and EMS Frequencies
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Tehama County channels that also cover Gerber
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Co Fire Tac | Co Fire Tactical | 154.3850 | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Tehama County Hospital | St. Elizabeth Community Hospital | 463.1000 In 468.1000 | 151.4 PL | FM | WDT370 |
Nearest trunked radio sites
Distances are measured from the center of Gerber.
Tuscan Butte · California Radio Interoperable System (CRIS)
RFSS 1 · Site 10 (hex A) · NAC 9DA · about 14 mi away
Control 769.96875, 770.91875, 773.34375, 773.79375
Voice 774.04375, 774.78125
Simulcast · Chico
RFSS 1 · Site 1 (hex 1) · NAC BC1 · about 30 mi away
Control 854.975, 855.75, 856.025
Voice 856.275
South Fork Mountain VHF · California Radio Interoperable System (CRIS)
RFSS 1 · Site 125 (hex 7D) · NAC 9D5 · about 46 mi away
Control 151.13, 154.6725, 155.3775
Voice 155.9025
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What scanner do I need to listen to fire and EMS in Gerber?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Gerber?
For Gerber, start with the Tuscan Butte site of California Radio Interoperable System (CRIS). Its control channels are 769.96875, 770.91875, 773.34375, 773.79375 MHz. Program a control channel first; the scanner finds the voice channels from it.