Skip to content

McClave Fire and EMS Frequencies

McClave in Bent County, Colorado has 0 conventional frequencies and 2 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Lamar (State of Colorado DTRS), about 13 miles away.

About McClave Fire and EMS Frequencies

Quick answer: Trunked: State of Colorado DTRS, for example Bent County Fire talkgroup 269 (hex 10d).

  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 2 talkgroups; State of Colorado DTRS: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For McClave, start with the Lamar site of State of Colorado DTRS, about 13 miles away. Its control channels: 852.1, 852.6, 852.9375 MHz.

Data updated .

McClave trunked talkgroups

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Bent County FireHasty/McClave Fire26910dD
Bent County FireHasty/McClave Fire Tactical27010eD

Bent County channels that also cover McClave

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Bent County EMSAmbulance Service203cbD

Nearest trunked radio sites

Distances are measured from the center of McClave.

Lamar · State of Colorado DTRS
RFSS 6 · Site 18 (hex 12) · NAC D12 · about 13 mi away
Control 852.1, 852.6, 852.9375, 853.2375
Voice 851.7875, 855.2375, 856.5875
Fort Lyon · State of Colorado DTRS
RFSS 6 · Site 55 (hex 37) · NAC D17 · about 16 mi away
Control 852.7125, 853.175, 853.6, 853.875
Voice 851.7375, 852.15, 855.4625
Haswell · State of Colorado DTRS
RFSS 6 · Site 36 (hex 24) · NAC D14 · about 19 mi away
Control 852.975, 853.25, 853.5, 853.95
Voice 852.1375, 857.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in McClave?

Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in McClave?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in McClave?

For McClave, start with the Lamar site of State of Colorado DTRS. Its control channels are 852.1, 852.6, 852.9375, 853.2375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are McClave fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for McClave are marked encrypted.