About Upper Bear Creek Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Upper Bear Creek: Clear Creek County Fire 155.0250 MHz, narrow FM, 100.0 PL. Trunked: State of Colorado DTRS, for example Clear Creek County Fire talkgroup 3203 (hex c83).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Upper Bear Creek, start with the Mestaa’ehehe site of State of Colorado DTRS, about 6 miles away. Its control channels: 853.45, 853.6125, 853.85 MHz.
Data updated .
Clear Creek County channels that also cover Upper Bear Creek
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clear Creek County Fire | Clear Creek County Fire – Dispatch | 155.0250 | 100.0 PL | FMN | KEO378 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clear Creek County Fire | Police Department/Fire/EMS Tactical | 154.3550 | 100.0 PL | FMN | KB48100 |
| Clear Creek County Fire | Police Department/Fire/EMS Tactical | 155.1000 | 100.0 PL | FMN | KCU836 |
| Clear Creek County Fire | Alpine Rescue | 155.1600 | FMN | KWF677 | |
| Clear Creek County Fire | Police Department/Fire/EMS Tactical | 155.1750 In 156.0000 | 100.0 PL | FMN | WPWM996 |
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Clear Creek County Fire | Clear Creek County Fire – Dispatch | 3203 | c83 | D |
| Clear Creek County Fire | Clear Creek County Fire – Fire Ground | 3204 | c84 | D |
| Clear Creek County Fire | Search and Rescue | 3208 | c88 | D |
Nearest trunked radio sites
Distances are measured from the center of Upper Bear Creek.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Upper Bear Creek?
We do not have a fire dispatch channel listed specifically for Upper Bear Creek. The county-level fire dispatch channels in the same county: Clear Creek County Fire 155.0250 MHz, narrow FM, 100.0 PL.
Do fire departments and EMS use a trunked radio system in Upper Bear Creek?
Yes. The county-level systems that cover Upper Bear Creek are Fire and EMS talkgroups are listed for State of Colorado DTRS: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Upper Bear Creek?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Upper Bear Creek?
For Upper Bear Creek, start with the Mestaa’ehehe site of State of Colorado DTRS. Its control channels are 853.45, 853.6125, 853.85 MHz. Program a control channel first; the scanner finds the voice channels from it.