About Matheson Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Matheson: Big Sandy Fire Protection District 151.2275 MHz, FM, 203.5 PL; North Central Fire Protection District 153.9950 MHz, FM, 146.2 PL; Rattlesnake Fire Protection District 155.3850 MHz, FM, 103.5 PL. Trunked: State of Colorado DTRS, for example Elbert County Fire talkgroup 515 (hex 203).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Matheson, start with the Simla site of State of Colorado DTRS, about 7 miles away. Its control channels: 851.8375, 852.825, 853.0375 MHz.
Data updated .
Elbert County channels that also cover Matheson
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Big Sandy Fire Protection District | Fire Protection District | 151.2275 In 159.3675 | 203.5 PL | FM | WQIL460 |
| North Central Fire Protection District | North Central Fire Protection District | 153.9950 In 151.0400 | 146.2 PL | FM | WPDU920 |
| Rattlesnake Fire Protection District | Rattlesnake Fire Protection District Dispatch | 155.3850 In 150.8050 | 103.5 PL | FM | WNJE750 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rattlesnake Fire Protection District | Rattlesnake Fire Protection District Tactical | 158.8800 | FM | WNJE750 |
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Elbert County Fire | Fire Operations | 515 | 203 | D |
| Elbert County Fire | Fire Operations 4 Agate | 516 | 204 | D |
| Elbert County Fire | Fire Operations | 519 | 207 | D |
| Elbert County Fire | Fire Operations | 520 | 208 | D |
| Elbert County Fire | Fire Operations | 521 | 209 | D |
| Elbert County Fire | Fire Operations | 526 | 20e | D |
| Elbert County Fire | Fire Operations | 527 | 20f | D |
| Elbert County Fire | Fire Operations | 528 | 210 | D |
| Elbert County Fire | Fire Administration | 518 | 206 | D |
| Elbert County Fire | Fire Operations 9 Training | 525 | 20d | D |
| Elbert County Fire | Fire Operations 10 Training | 529 | 211 | D |
Nearest trunked radio sites
Distances are measured from the center of Matheson.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Matheson?
We do not have a fire dispatch channel listed specifically for Matheson. The county-level fire dispatch channels in the same county: Big Sandy Fire Protection District 151.2275 MHz, FM, 203.5 PL; North Central Fire Protection District 153.9950 MHz, FM, 146.2 PL; Rattlesnake Fire Protection District 155.3850 MHz, FM, 103.5 PL.
Do fire departments and EMS use a trunked radio system in Matheson?
Yes. The county-level systems that cover Matheson are Fire and EMS talkgroups are listed for State of Colorado DTRS: 11 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Matheson?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Matheson?
For Matheson, start with the Simla site of State of Colorado DTRS. Its control channels are 851.8375, 852.825, 853.0375, 853.2875 MHz. Program a control channel first; the scanner finds the voice channels from it.