Skip to content

Rollinsville Fire and EMS Frequencies

We do not have frequencies listed specifically for Rollinsville in Gilpin County, Colorado yet. Countywide channels for Gilpin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Dakota Hill (State of Colorado DTRS), about 4 miles away.

About Rollinsville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Rollinsville: Gilpin County Fire 153.8450 MHz, narrow FM, 100.0 PL. Trunked: State of Colorado DTRS, for example Gilpin County Fire talkgroup 3131 (hex c3b).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Rollinsville, start with the Dakota Hill site of State of Colorado DTRS, about 4 miles away. Its control channels: 851.9625, 852.4625, 852.9625 MHz.

Data updated .

Gilpin County channels that also cover Rollinsville

Fire Dispatch

Fire Dispatch frequencies for Gilpin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gilpin County FireGilpin County Fire Operations153.8450
In 156.0150
100.0 PLFMNWQSY506
Gilpin County FireBlack Hawk Fire Department, Central City Fire Department, Timberline Fire Department, Gilpin EMS Dispatch154.0250
In 158.7300
100.0 PLFMNWQSM422

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Gilpin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Timberline Fire Protection DistrictTimberline Fire Protection District154.1450
In 151.1525
100.0 PLFM—

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Gilpin County FireGilpin County Fire – Dispatch3131c3bD
Gilpin County FireFire Paging3142c46D
Gilpin County FireGilpin County Fire – Tactical Channel3132c3cD
Gilpin County FireTimberline Fire Tactical3134c3eD

Nearest trunked radio sites

Distances are measured from the center of Rollinsville.

Dakota Hill · State of Colorado DTRS
RFSS 1 · Site 24 (hex 18) · NAC D18 · about 4 mi away
Control 851.9625, 852.4625, 852.9625, 853.4625
Voice 851.4625, 854.4875, 855.6, 857.5625, 858.025, 858.6375
Eldora Mountain · State of Colorado DTRS
RFSS 3 · Site 55 (hex 37) · NAC D17 · about 5 mi away
Control 773.04375, 773.29375, 773.54375, 773.79375
Voice 769.16875, 769.41875, 769.66875, 769.91875, 770.16875, 770.41875, 770.66875, 770.91875
Thorodin · State of Colorado DTRS
RFSS 1 · Site 5 (hex 5) · NAC D15 · about 5 mi away
Control 853.1625, 853.55, 853.975
Voice 851.125, 851.275, 851.4625, 851.625, 851.8, 852.0875, 852.2375, 852.6625, 852.9875, 853.3375, 854.7125, 855.5875, 856.0125, 857.0375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Rollinsville?

We do not have a fire dispatch channel listed specifically for Rollinsville. The county-level fire dispatch channels in the same county: Gilpin County Fire 153.8450 MHz, narrow FM, 100.0 PL.

Do fire departments and EMS use a trunked radio system in Rollinsville?

Yes. The county-level systems that cover Rollinsville are Fire and EMS talkgroups are listed for State of Colorado DTRS: 4 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Rollinsville?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Rollinsville?

For Rollinsville, start with the Dakota Hill site of State of Colorado DTRS. Its control channels are 851.9625, 852.4625, 852.9625, 853.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.