Skip to content

Somerset Fire and EMS Frequencies

We do not have frequencies listed specifically for Somerset in Gunnison County, Colorado yet. Countywide channels for Gunnison County that may also cover this area are shown below when we have them. The closest trunked radio site we have is TV Hill (State of Colorado DTRS), about 7 miles away.

About Somerset Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Somerset: Gunnison County Fire 154.4300 MHz, narrow FM, 151.4 PL. Trunked: State of Colorado DTRS, for example Gunnison County Fire talkgroup 8489 (hex 2129).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Somerset, start with the TV Hill site of State of Colorado DTRS, about 7 miles away. Its control channels: 852.425, 852.8, 853.3875 MHz.

Data updated .

Gunnison County channels that also cover Somerset

Fire Dispatch

Fire Dispatch frequencies for Gunnison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gunnison County FireGunnison County Fire – Dispatch154.4300
In 153.7700
151.4 PLFMNKNCE405

Hospitals & Medical

Hospitals & Medical frequencies for Gunnison County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Gunnison County HospitalGunnison Valley Hospital151.1150
In 154.4000
FMN—
Gunnison County HospitalGunnison Valley Hospital155.400071.9 PLFMNKVG860

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Gunnison County FireWest Elk Mountain Rescue84892129D
Gunnison County FireWestern Colorado University Mountain Rescue Team8491212bD
Gunnison County EMSGunnison County EMS – Dispatch85192147D

Nearest trunked radio sites

Distances are measured from the center of Somerset.

TV Hill · State of Colorado DTRS
RFSS 5 · Site 34 (hex 22) · NAC D12 · about 7 mi away
Control 852.425, 852.8, 853.3875, 853.9875
Voice 851.6125, 859.0125
Marble · State of Colorado DTRS
RFSS 2 · Site 97 (hex 61) · NAC D11 · about 16 mi away
Control 857.2875, 858.3875, 859.3875
Voice 856.2875
Youngs Peak · State of Colorado DTRS
RFSS 5 · Site 21 (hex 15) · NAC D15 · about 17 mi away
Control 851.725, 852.7875, 853.05, 853.2
Voice 851.2, 854.7375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Somerset?

We do not have a fire dispatch channel listed specifically for Somerset. The county-level fire dispatch channels in the same county: Gunnison County Fire 154.4300 MHz, narrow FM, 151.4 PL.

Do fire departments and EMS use a trunked radio system in Somerset?

Yes. The county-level systems that cover Somerset are Fire and EMS talkgroups are listed for State of Colorado DTRS: 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Somerset?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Somerset?

For Somerset, start with the TV Hill site of State of Colorado DTRS. Its control channels are 852.425, 852.8, 853.3875, 853.9875 MHz. Program a control channel first; the scanner finds the voice channels from it.