About Gardner Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Gardner: Huerfano County Fire 154.2125 MHz, narrow FM, no tone. Trunked: State of Colorado DTRS, for example Gardner Fire talkgroup 1102 (hex 44e).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 1 talkgroup; State of Colorado DTRS: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Gardner, start with the Sheep Mountain site of State of Colorado DTRS, about 7 miles away. Its control channels: 852.8875, 853.35, 853.65 MHz.
Data updated .
Gardner trunked talkgroups
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Gardner Fire | Upper Huerfano Fire Protection District | 1102 | 44e | D |
Huerfano County channels that also cover Gardner
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Huerfano County Fire | Huerfano County Fire Protection District | 154.2125 In 150.7825 | FMN | WPPU374 | |
| Huerfano County Fire | Laveta Fire Protection District | 154.3700 In 153.8900 | 203.5 PL | FMN | WNCH565 |
| Huerfano County Fire | Rye Fire Protection District | 154.4450 In 153.9500 | 203.5 PL | FMN | KYK357 |
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Huerfano County Fire | Huerfano County Fire – Dispatch | 1203 | 4b3 | D |
| Huerfano County Fire | Huerfano County Fire – Tactical Channel | 606 | 25e | D |
| Huerfano County Fire | Search and Rescue | 607 | 25f | D |
| Huerfano County Fire | Huerfano County Fire – Fire Ground | 1204 | 4b4 | D |
| Huerfano County EMS | Huerfano County EMS – Tactical Channel | 1205 | 4b5 | D |
Nearest trunked radio sites
Distances are measured from the center of Gardner.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Gardner?
We do not have a fire dispatch channel listed specifically for Gardner. The county-level fire dispatch channels in the same county: Huerfano County Fire 154.2125 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Gardner?
Yes. Fire and EMS talkgroups are listed for State of Colorado DTRS: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Gardner?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Gardner?
For Gardner, start with the Sheep Mountain site of State of Colorado DTRS. Its control channels are 852.8875, 853.35, 853.65, 853.9 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Gardner fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Gardner are marked encrypted.