About Redlands Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Redlands: Central Orchard Mesa Fire 154.1900 MHz, narrow FM, 146.2 PL. Trunked: State of Colorado DTRS, for example Colorado State Fire talkgroup 11750 (hex 2de6).
- 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Redlands, start with the Redlands site of State of Colorado DTRS, about 2 miles away. Its control channels: 852.975, 853.25, 853.5 MHz.
Data updated .
Mesa County channels that also cover Redlands
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Central Orchard Mesa Fire | Central Orchard Mesa Fire – Dispatch | 154.1900 In 150.8050 | 146.2 PL | FMN | WPJR479 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Glade Park Fire | Glade Park Fire – Fire Ground | 156.0150 | 88.5 PL | FMN | — |
| Lands End Fire Protection District | Lands End Fire Protection District – Tactical Channel | 155.5500 In 159.2850 | 114.8 PL | FMN | WPWZ982 |
| Lower Valley Fire Protection District | Lower Valley Fire Protection District – Tactical Channel | 154.8225 In 159.0375 | 146.2 PL | FMN | WQLI890 |
| Mesa County Fire | Search and Rescue | 155.2200 | FMN | KSM888 | |
| Plateau Valley Fire Protection District | Plateau Valley Fire Protection District – Tactical Channel | 154.4150 In 153.8900 | 131.8 PL | FMN | WNMT211 |
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Colorado State Fire | Sheriff Wildland Fire Tactical | 11750 | 2de6 | D |
| Mesa County Fire | Sheriff Search & Rescue | 8452 | 2104 | D |
| Mesa County Fire | East Orchard Mesa Fire Tactical | 11753 | 2de9 | D |
| Mesa County Fire | Gateway Fire Tactical | 11754 | 2dea | D |
| Mesa County Fire | Glade Park Fire Tactical | 11756 | 2dec | D |
| Mesa County Fire | Fire Authority Tactical | 11757 | 2ded | D |
| Mesa County Fire | Lower Valley Fire Tactical | 11758 | 2dee | D |
| Mesa County Fire | Plateau Valley Fire Tactical | 11760 | 2df0 | D |
Nearest trunked radio sites
Distances are measured from the center of Redlands.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Redlands?
We do not have a fire dispatch channel listed specifically for Redlands. The county-level fire dispatch channels in the same county: Central Orchard Mesa Fire 154.1900 MHz, narrow FM, 146.2 PL.
Do fire departments and EMS use a trunked radio system in Redlands?
Yes. The county-level systems that cover Redlands are Fire and EMS talkgroups are listed for State of Colorado DTRS: 8 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Redlands?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Redlands?
For Redlands, start with the Redlands site of State of Colorado DTRS. Its control channels are 852.975, 853.25, 853.5, 853.95 MHz. Program a control channel first; the scanner finds the voice channels from it.