About Maybell Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Maybell: Moffat County Fire 154.2200 MHz, narrow FM, 146.2 PL. County-level ems dispatch that covers Maybell: Moffat County EMS 154.2200 MHz, narrow FM, no tone. Trunked: State of Colorado DTRS, for example Moffat County EMS talkgroup 8356 (hex 20a4).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Maybell, start with the Juniper Mountain site of State of Colorado DTRS, about 6 miles away. Its control channels: 852.0875, 852.2375, 852.6625 MHz.
Data updated .
Moffat County channels that also cover Maybell
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Moffat County Fire | Moffat County Fire – Dispatch | 154.2200 In 154.4300 | 146.2 PL | FMN | WNIA959 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Moffat County EMS | Moffat County EMS – Dispatch (Memorial Hosptial Crag) | 154.2200 | FMN | WNIA959 |
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Moffat County EMS | EMS Auxiliary | 8356 | 20a4 | D |
| Moffat County EMS | Moffat County EMS – Tactical Channel | 8362 | 20aa | D |
Nearest trunked radio sites
Distances are measured from the center of Maybell.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Maybell?
We do not have a fire dispatch channel listed specifically for Maybell. The county-level fire dispatch channels in the same county: Moffat County Fire 154.2200 MHz, narrow FM, 146.2 PL.
What frequency does EMS or the ambulance service use in Maybell?
We do not have a EMS dispatch channel listed specifically for Maybell. The county-level EMS dispatch channels in the same county: Moffat County EMS 154.2200 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Maybell?
Yes. The county-level systems that cover Maybell are Fire and EMS talkgroups are listed for State of Colorado DTRS: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Maybell?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Maybell?
For Maybell, start with the Juniper Mountain site of State of Colorado DTRS. Its control channels are 852.0875, 852.2375, 852.6625, 853.55 MHz. Program a control channel first; the scanner finds the voice channels from it.