Skip to content

Placerville Fire and EMS Frequencies

We do not have frequencies listed specifically for Placerville in San Miguel County, Colorado yet. Countywide channels for San Miguel County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Specie Mesa (State of Colorado DTRS), about 2 miles away.

About Placerville Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Placerville: San Miguel County Fire 154.1450 MHz, narrow FM, no tone. Trunked: State of Colorado DTRS, for example San Miguel County Fire talkgroup 8575 (hex 217f).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Placerville, start with the Specie Mesa site of State of Colorado DTRS, about 2 miles away. Its control channels: 851.95, 852.7, 853.475 MHz.

Data updated .

San Miguel County channels that also cover Placerville

Fire Dispatch

Fire Dispatch frequencies for San Miguel County
AgencyDescriptionFrequency (MHz)ToneModeFCC
San Miguel County FireNorwood Fire Protection District154.1450FMNKNGW661

Fire Ground / Tactical

Fire Ground / Tactical frequencies for San Miguel County
AgencyDescriptionFrequency (MHz)ToneModeFCC
San Miguel County FireSearch and Rescue155.1600FMN—

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
San Miguel County FireSearch & Rescue8575217fD
San Miguel County FireSearch & Rescue Dispatch85762180D

Nearest trunked radio sites

Distances are measured from the center of Placerville.

Specie Mesa · State of Colorado DTRS
RFSS 5 · Site 24 (hex 18) · NAC D18 · about 2 mi away
Control 851.95, 852.7, 853.475, 853.925
Voice 851.15, 857.2375
Coonskin Ridge · State of Colorado DTRS
RFSS 5 · Site 72 (hex 48) · NAC D18 · about 12 mi away
Control 851.6375, 851.8, 853.4125, 853.775
Voice 851.125, 856.1125
Log Hill · State of Colorado DTRS
RFSS 5 · Site 38 (hex 26) · NAC D16 · about 19 mi away
Control 852.775, 853.0875, 853.325, 853.725
Voice 852.25, 857.5875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Placerville?

We do not have a fire dispatch channel listed specifically for Placerville. The county-level fire dispatch channels in the same county: San Miguel County Fire 154.1450 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Placerville?

Yes. The county-level systems that cover Placerville are Fire and EMS talkgroups are listed for State of Colorado DTRS: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Placerville?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Placerville?

For Placerville, start with the Specie Mesa site of State of Colorado DTRS. Its control channels are 851.95, 852.7, 853.475, 853.925 MHz. Program a control channel first; the scanner finds the voice channels from it.