Skip to content

Heeney Fire and EMS Frequencies

We do not have frequencies listed specifically for Heeney in Summit County, Colorado yet. Countywide channels for Summit County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Blue Ridge (State of Colorado DTRS), about 4 miles away.

About Heeney Fire and EMS Frequencies

Quick answer: Trunked: State of Colorado DTRS, for example Summit County Fire talkgroup 12476 (hex 30bc).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Heeney, start with the Blue Ridge site of State of Colorado DTRS, about 4 miles away. Its control channels: 851.8375, 852.7625, 853.2 MHz.

Data updated .

Summit County channels that also cover Heeney

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Summit County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Mountain Rescue Channel-1Mountain Rescue Channel155.1600CSQFMNKZJ918
Mountain Rescue Channel-2Mountain Rescue Channel155.2350CSQFMNWQG741

State of Colorado DTRS

State of Colorado DTRS talkgroups
AgencyDescriptionTalkgroupHexMode
Summit County FireSearch and Rescue1247630bcD

Nearest trunked radio sites

Distances are measured from the center of Heeney.

Blue Ridge · State of Colorado DTRS
RFSS 3 · Site 48 (hex 30) · NAC D10 · about 4 mi away
Control 851.8375, 852.7625, 853.2, 853.7625
Voice 851.0375, 851.675
San Toy Mountain · State of Colorado DTRS
RFSS 3 · Site 42 (hex 2A) · NAC D1A · about 12 mi away
Control 852.2375, 852.6625, 853.1875, 853.55
Voice 851.625, 852.0875
Vail · State of Colorado DTRS
RFSS 2 · Site 76 (hex 4C) · NAC D1C · about 16 mi away
Control 851.5625, 851.8875, 852.125, 853.9625
Voice 851.1875, 851.3625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Heeney?

Yes. The county-level systems that cover Heeney are Fire and EMS talkgroups are listed for State of Colorado DTRS: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Heeney?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Heeney?

For Heeney, start with the Blue Ridge site of State of Colorado DTRS. Its control channels are 851.8375, 852.7625, 853.2, 853.7625 MHz. Program a control channel first; the scanner finds the voice channels from it.