About Goldfield Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Goldfield: Teller County Fire 154.1900 MHz, narrow FM, 151.4 PL. County-level ems dispatch that covers Goldfield: Teller County EMS 464.9125 MHz, narrow FM, 250.3 PL. Trunked: State of Colorado DTRS, for example Teller County Fire talkgroup 4851 (hex 12f3).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: State of Colorado DTRS: 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Goldfield, start with the Little Grouse site of State of Colorado DTRS, about 2 miles away. Its control channels: 852.0875, 852.2375, 852.6625 MHz.
Data updated .
Teller County channels that also cover Goldfield
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Teller County Fire | Florissant Fire Dispatch | 154.1900 In 153.7700 | 151.4 PL | FMN | WNUA286 |
| Teller County Fire | Northeast Teller County Fire District | 154.4000 In 151.0100 | 179.9 PL | FMN | WPGB440 |
| Teller County Fire | Mountain Communities Volunteer Fire Department | 154.9875 | 167.9 PL | FMN | WQYT244 |
| Teller County Fire | Four Mile Fire Protection District | 155.1300 In 158.8050 | 107.2 PL | FMN | WPTD524 |
| Teller County Fire | Divide Fire | 155.9850 In 159.0150 | 107.2 PL | FMN | WNJX896 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Teller County Fire | County Search and Rescue | 155.1750 | 179.9 PL | FMN | KNCD841 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Teller County EMS | Southwest Teller County EMS | 464.9125 In 469.9125 | 250.3 PL | FMN | — |
State of Colorado DTRS
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Teller County Fire | Northwest Teller County Fire | 4851 | 12f3 | D |
| Teller County Fire | Teller County Fire – Dispatch | 6142 | 17fe | D |
| Teller County Fire | Northeast Teller County (NETCO) Fire | 6151 | 1807 | D |
| Teller County Fire | Northwest Teller County Fire | 4852 | 12f4 | D |
| Teller County EMS | Teller County EMS – Dispatch | 6143 | 17ff | D |
Nearest trunked radio sites
Distances are measured from the center of Goldfield.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Goldfield?
We do not have a fire dispatch channel listed specifically for Goldfield. The county-level fire dispatch channels in the same county: Teller County Fire 154.1900 MHz, narrow FM, 151.4 PL.
What frequency does EMS or the ambulance service use in Goldfield?
We do not have a EMS dispatch channel listed specifically for Goldfield. The county-level EMS dispatch channels in the same county: Teller County EMS 464.9125 MHz, narrow FM, 250.3 PL.
Do fire departments and EMS use a trunked radio system in Goldfield?
Yes. The county-level systems that cover Goldfield are Fire and EMS talkgroups are listed for State of Colorado DTRS: 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Goldfield?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Goldfield?
For Goldfield, start with the Little Grouse site of State of Colorado DTRS. Its control channels are 852.0875, 852.2375, 852.6625, 853.55 MHz. Program a control channel first; the scanner finds the voice channels from it.