About Brooker Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Brooker: Bradford County Fire 154.2500 MHz, narrow FM, 365 DPL. County-level ems dispatch that covers Brooker: Bradford County EMS 463.0000 MHz, FM, 94.8 PL.
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Bradford County channels that also cover Brooker
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bradford County Fire | Bradford County Fire – Tactical Channel / Dispatch | 154.2500 In 159.3450 | 365 DPL | FMN | KFK524 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bradford County Fire | Bradford County Fire – Tactical Channel / Fireground (also used by BCSD Buses) | 151.1675 In 155.2575 | 100.0 PL | FMN | WQPB770 |
| Bradford County Fire | Bradford County Fire – Tactical Channel / Fireground | 151.3250 In 153.8150 | 203.5 PL | FM | WPOX402 |
| Bradford County Fire | Bradford County Fire – Tactical Channel / Fireground | 159.3450 | CSQ | FM | WPOX402 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bradford County EMS | Bradford County EMS – Dispatch | 463.0000 In 468.0000 | 94.8 PL | FM | WPKE663 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bradford County EMS | County Medical Coordination | 463.0250 In 468.0250 | 94.8 PL | FM | WPKE663 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bradford County Hospital | EMS-to- HCA FL North Florida Starke ER | 463.1625 In 468.1625 | 94.8 PL | FM | WQDL726 |
Nearest trunked radio sites
Distances are measured from the center of Brooker.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Brooker?
We do not have a fire dispatch channel listed specifically for Brooker. The county-level fire dispatch channels in the same county: Bradford County Fire 154.2500 MHz, narrow FM, 365 DPL.
What frequency does EMS or the ambulance service use in Brooker?
We do not have a EMS dispatch channel listed specifically for Brooker. The county-level EMS dispatch channels in the same county: Bradford County EMS 463.0000 MHz, FM, 94.8 PL.
What scanner do I need to listen to fire and EMS in Brooker?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Brooker?
For Brooker, start with the Starke site of Statewide Law Enforcement Radio System (EDACS). Its control channels are 851.9875, 854.075, 854.1, 854.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.