About Jasper Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Jasper: Hamilton County Fire 154.3400 MHz, FM, 162.2 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Hamilton County channels that also cover Jasper
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamilton County Fire | Fire Rescue Dispatch | 154.3400 In 159.0600 | 162.2 PL | FM | WPDG643 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hamilton County Fire | Jennings Fire Tactical | 151.9550 | 205 DPL | FM | — |
Nearest trunked radio sites
Distances are measured from the center of Jasper.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Jasper?
We do not have a fire dispatch channel listed specifically for Jasper. The county-level fire dispatch channels in the same county: Hamilton County Fire 154.3400 MHz, FM, 162.2 PL.
What scanner do I need to listen to fire and EMS in Jasper?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Jasper?
For Jasper, start with the Live Oak site of Statewide Law Enforcement Radio System (EDACS). Its control channels are 854.05 MHz. Program a control channel first; the scanner finds the voice channels from it.