About Jefferson County Fire and EMS Frequencies
Quick answer: Fire dispatch for Jefferson County: Jefferson County Fire 453.6750 MHz, FM, 606 DPL. EMS dispatch for Jefferson County: Jefferson County EMS 462.9750 MHz, FM, 156.7 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Jefferson County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson County Fire | North | 453.6750 In 458.6750 | 606 DPL | FM | KYK400 |
| Jefferson County Fire | South | 453.6750 In 458.6750 | 606 DPL | FM | KYK400 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Jefferson County EMS | North | 462.9750 In 467.9750 | 156.7 PL | FM | KYK400 |
| Jefferson County EMS | South | 462.9750 In 467.9750 | 156.7 PL | FM | KYK400 |
Radio system sites in Jefferson County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Jefferson County
Common questions
What frequency does the fire department use in Jefferson County?
Fire dispatch channels listed for Jefferson County: Jefferson County Fire 453.6750 MHz, FM, 606 DPL.
What frequency does EMS or the ambulance service use in Jefferson County?
EMS dispatch channels listed for Jefferson County: Jefferson County EMS 462.9750 MHz, FM, 156.7 PL.
What scanner do I need to listen to fire and EMS in Jefferson County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Jefferson County?
For Jefferson County, start with the Monticello site of Statewide Law Enforcement Radio System (P25). Its control channels are 851.9875, 854.075, 854.9375, 855.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Jefferson County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Jefferson County are marked encrypted.