Skip to content

Liberty County Fire and EMS Frequencies

Liberty County in Florida has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Liberty County Fire and EMS Frequencies

Quick answer: Fire dispatch for Liberty County: Liberty County Fire 460.0500 MHz, FM, 173.8 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Liberty County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Liberty County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Liberty County FireFire / EMS Dispatch460.0500
In 465.0500
173.8 PLFM—

Radio system sites in Liberty County

Program the control channel first; your scanner finds the voice channels from it.

South Liberty · Statewide Law Enforcement Radio System (EDACS)
Site 232 (hex E8)
Control 851.4625, 854.4125, 854.7875, 855.7375, 856.4375, 856.9375
Telogia · Statewide Law Enforcement Radio System (P25)
Project 25 · RFSS 49 · Site 49 (hex 31) · NAC FD1
Control 851.975, 854.0125, 854.05, 854.2625, 855.2625
Sumatra · Statewide Law Enforcement Radio System (P25)
Project 25 · RFSS 81 · Site 81 (hex 51) · NAC FF1
Control 851.4625, 854.4125, 854.7875, 855.7375, 856.4375, 856.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Liberty County

Common questions

What frequency does the fire department use in Liberty County?

Fire dispatch channels listed for Liberty County: Liberty County Fire 460.0500 MHz, FM, 173.8 PL.

What scanner do I need to listen to fire and EMS in Liberty County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Liberty County?

For Liberty County, start with the South Liberty site of Statewide Law Enforcement Radio System (EDACS). Its control channels are 851.4625, 854.4125, 854.7875, 855.7375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Liberty County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Liberty County are marked encrypted.