Skip to content

Wakulla County Fire and EMS Frequencies

Wakulla County in Florida has 4 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Wakulla County Fire and EMS Frequencies

Quick answer: Fire dispatch for Wakulla County: Wakulla County Fire 154.3550 MHz, narrow FM, 186.2 PL. EMS dispatch for Wakulla County: Wakulla County EMS 462.9500 MHz, FM, 156.7 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Wakulla County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Wakulla County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wakulla County FireFire Rescue Dispatch154.3550
In 158.9025
186.2 PLFMNWNWX668

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Wakulla County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wakulla County FireFire Rescue Secondary155.3025
In 154.0100
186.2 PLFMNWNWX668

EMS Dispatch

EMS Dispatch frequencies for Wakulla County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Wakulla County EMSWakulla County EMS – Dispatch462.9500
In 467.9500
156.7 PLFMKYK402
Wakulla County EMSWakulla County Ambulance Service463.1125156.7 PLFMKYK402

Radio system sites in Wakulla County

Program the control channel first; your scanner finds the voice channels from it.

Wakulla · Statewide Law Enforcement Radio System (P25)
Project 25 · RFSS 18 · Site 18 (hex 12) · NAC FB2
Control 852.9875, 853.475, 853.975, 856.5125, 856.6625
Sopchoppy · Statewide Law Enforcement Radio System (P25)
Project 25 · RFSS 45 · Site 45 (hex 2D) · NAC FCD
Control 851.1, 851.4375, 854.2125, 854.6125, 856.3375, 856.6875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Wakulla County

Common questions

What frequency does the fire department use in Wakulla County?

Fire dispatch channels listed for Wakulla County: Wakulla County Fire 154.3550 MHz, narrow FM, 186.2 PL.

What frequency does EMS or the ambulance service use in Wakulla County?

EMS dispatch channels listed for Wakulla County: Wakulla County EMS 462.9500 MHz, FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Wakulla County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Wakulla County?

For Wakulla County, start with the Wakulla site of Statewide Law Enforcement Radio System (P25). Its control channels are 852.9875, 853.475, 853.975, 856.5125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Wakulla County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Wakulla County are marked encrypted.