Skip to content

Washington County Fire and EMS Frequencies

Washington County in Florida has 5 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 5 cities and communities below for local fire departments and EMS agencies.

About Washington County Fire and EMS Frequencies

Quick answer: Fire dispatch for Washington County: Washington County Fire 453.5250 MHz, narrow FM, 186.2 PL. EMS dispatch for Washington County: Washington County EMS 460.3750 MHz, DMR, CC 1 · TG 45000 · SL 1.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Washington County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County FireWashington County Fire – Dispatch (Toneouts)453.5250
In 458.5250
186.2 PLFMNWPFE577
Washington County FireWashington County Fire – Dispatch453.5875
In 458.5375
CC 1 · TG 10101 · SL 1DMRWPFE577

EMS Dispatch

EMS Dispatch frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County EMSWashington County EMS – Dispatch460.3750
In 465.3750
CC 1 · TG 45000 · SL 1DMRKNHJ747

EMS Tactical

EMS Tactical frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County EMSWashington County EMS – Tactical Channel460.3750CC 1 · TG 45001 · SL 1DMR—

Hospitals & Medical

Hospitals & Medical frequencies for Washington County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Washington County HospitalEMS-to-NWF Community Hospital463.0375
In 468.0375
146.2 PLFMKNHJ747

Radio system sites in Washington County

Program the control channel first; your scanner finds the voice channels from it.

Washington · Statewide Law Enforcement Radio System (P25)
Project 25 · RFSS 93 · Site 93 (hex 5D) · NAC FFD
Control 851.9625, 852.4625, 852.9625, 856.6875
Millers Ferry · Statewide Law Enforcement Radio System (P25)
Project 25 · RFSS 97 · Site 97 (hex 61) · NAC 3CE
Control 852.05, 852.725, 853.475, 854.5875, 856.3875, 856.65
Chipley · Statewide Law Enforcement Radio System (P25)
Project 25 · RFSS 105 · Site 105 (hex 69) · NAC 41E
Control 852.4875, 852.9875, 854.15, 856.525, 856.8625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Washington County

Common questions

What frequency does the fire department use in Washington County?

Fire dispatch channels listed for Washington County: Washington County Fire 453.5250 MHz, narrow FM, 186.2 PL.

What frequency does EMS or the ambulance service use in Washington County?

EMS dispatch channels listed for Washington County: Washington County EMS 460.3750 MHz, DMR, CC 1 · TG 45000 · SL 1.

What scanner do I need to listen to fire and EMS in Washington County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Washington County?

For Washington County, start with the Washington site of Statewide Law Enforcement Radio System (P25). Its control channels are 851.9625, 852.4625, 852.9625, 856.6875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Washington County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Washington County are marked encrypted.