About Hardwick Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Hardwick: Baldwin County Fire 154.1750 MHz, narrow FM, no tone. Trunked: Baldwin County Public Safety (GA), for example Baldwin County Fire/EMS talkgroup 39100 (hex 98bc).
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Baldwin County Public Safety (GA): 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Hardwick, start with the Milledgeville SImulcast site of Baldwin County Public Safety (GA), about 2 miles away. Its control channels: 769.85625, 770.60625, 771.50625 MHz.
- 5 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Baldwin County channels that also cover Hardwick
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Baldwin County Fire | Baldwin County Fire – Paging Only / Station Alerts | 154.1750 In 159.0600 | FMN | KNAI721 | |
| Baldwin County Fire | Baldwin County Fire – Dispatch | 156.2025 In 159.4125 | DMR | KNAI721 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Baldwin County Fire | Baldwin County Fire – Fire Ground | 153.8600 | DMR | WNVG530 |
Baldwin County Public Safety (GA)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Baldwin County Fire/EMS | Baldwin County Fire/EMS – Dispatch | 39100 | 98bc | D |
5 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Baldwin County Fire/EMS | Baldwin County Fire/EMS – Dispatch | 39105 | 98c1 | D Encrypted |
| Baldwin County Fire/EMS | Baldwin County Fire/EMS – Operations | 39101 | 98bd | D Encrypted |
| Baldwin County Fire/EMS | Baldwin County Fire/EMS – Operations | 39102 | 98be | D Encrypted |
| Baldwin County Fire/EMS | Baldwin County Fire/EMS – Administration | 39103 | 98bf | D Encrypted |
| Baldwin County Fire/EMS | Baldwin County Fire/EMS – Dispatch (Atrium Baldwin) | 39120 | 98d0 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Hardwick.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hardwick?
We do not have a fire dispatch channel listed specifically for Hardwick. The county-level fire dispatch channels in the same county: Baldwin County Fire 154.1750 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Hardwick?
Yes. The county-level systems that cover Hardwick are Fire and EMS talkgroups are listed for Baldwin County Public Safety (GA): 6 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Hardwick?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Hardwick?
For Hardwick, start with the Milledgeville SImulcast site of Baldwin County Public Safety (GA). Its control channels are 769.85625, 770.60625, 771.50625, 772.98125 MHz. Program a control channel first; the scanner finds the voice channels from it.