About Kings Bay Base Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Kings Bay Base: Camden County Fire 154.8225 MHz, narrow FM, 364 DPL. Trunked: Camden County Public Safety (GA), for example Camden County Fire talkgroup 3001 (hex bb9).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Camden County Public Safety (GA): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Kings Bay Base, start with the Simulcast site of Camden County Public Safety (GA), about 10 miles away. Its control channels: 854.7625, 855.3625, 856.0375 MHz.
Data updated .
Camden County channels that also cover Kings Bay Base
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Camden County Fire | Camden County Fire – Dispatch (Countywide) (Channel 1) | 154.8225 In 158.9625 | 364 DPL | FMN | KIL390 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Camden County Fire | Camden County Fire – Tactical Channel (Channel 2) | 154.2425 In 156.0600 | 132 DPL | FMN | KIL390 |
Camden County Public Safety (GA)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Camden County Fire | Camden Fire | 3001 | bb9 | T |
| Camden County EMS | Camden EMS | 2001 | 7d1 | T |
Nearest trunked radio sites
Distances are measured from the center of Kings Bay Base.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Kings Bay Base?
We do not have a fire dispatch channel listed specifically for Kings Bay Base. The county-level fire dispatch channels in the same county: Camden County Fire 154.8225 MHz, narrow FM, 364 DPL.
Do fire departments and EMS use a trunked radio system in Kings Bay Base?
Yes. The county-level systems that cover Kings Bay Base are Fire and EMS talkgroups are listed for Camden County Public Safety (GA): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Kings Bay Base?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Kings Bay Base?
For Kings Bay Base, start with the Simulcast site of Camden County Public Safety (GA). Its control channels are 854.7625, 855.3625, 856.0375, 856.7875 MHz. Program a control channel first; the scanner finds the voice channels from it.