Skip to content

New England Fire and EMS Frequencies

We do not have frequencies listed specifically for New England in Dade County, Georgia yet. Countywide channels for Dade County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Rome/Floyd Co Simulcast (Floyd County Government (GA)), about 43 miles away.

About New England Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers New England: Dade County Fire 156.1875 MHz, narrow FM, 141.3 PL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

Dade County channels that also cover New England

Fire Dispatch

Fire Dispatch frequencies for Dade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dade County FireVolunteer Fire Departments156.1875
In 153.9500
141.3 PLFMNWYC618

EMS Tactical

EMS Tactical frequencies for Dade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dade County EMSDade County EMS – Dispatch (Puckett EMS)151.9700
In 157.5600
CC 11 · TG 1000 · SL 1DMRWQUQ877

EMS Talk-around

EMS Talk-around frequencies for Dade County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dade County EMSDade County EMS – Alternate (Puckett EMS)152.4200
In 158.3925
FMNWQUQ877
Dade County EMSDade County EMS – Alternate (Puckett EMS)154.4825
In 159.7350
CC 13 · TG * · SL *DMRWQUQ877

Nearest trunked radio sites

Distances are measured from the center of New England.

Rome/Floyd Co Simulcast · Floyd County Government (GA)
RFSS 1 · Site 1 (hex 1) · NAC F17 · about 43 mi away
Control 851.275, 851.4375, 851.825, 852.25, 852.45, 852.6375, 852.8125, 853.1125, 853.1875, 853.6875
Bartow County Simulcast · Cobb Regional Radio System
RFSS 1 · Site 5 (hex 5) · NAC 175 · about 58 mi away
Control 772.53125, 773.70625, 774.13125, 774.88125
Voice 769.24375, 771.70625, 772.05625
Cedartown · Polk County
Site 1 (hex 1) · about 64 mi away
Control 460.05
Voice 460.15, 460.3125, 460.35, 460.475
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in New England?

We do not have a fire dispatch channel listed specifically for New England. The county-level fire dispatch channels in the same county: Dade County Fire 156.1875 MHz, narrow FM, 141.3 PL.

What scanner do I need to listen to fire and EMS in New England?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in New England?

For New England, start with the Rome/Floyd Co Simulcast site of Floyd County Government (GA). Its control channels are 851.275, 851.4375, 851.825, 852.25 MHz. Program a control channel first; the scanner finds the voice channels from it.