Skip to content

Empire Fire and EMS Frequencies

We do not have frequencies listed specifically for Empire in Dodge County, Georgia yet. Countywide channels for Dodge County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Houston County Government (GA)), about 26 miles away.

Empire also extends into Bleckley County.

About Empire Fire and EMS Frequencies

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Dodge County channels that also cover Empire

Fire Talk-around

Fire Talk-around frequencies for Dodge County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dodge County FireFire Association155.9850
In 158.8425
167.9 PLFMNWQRP697

EMS Dispatch

EMS Dispatch frequencies for Dodge County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dodge County EMSDodge County EMS – Tactical Channel (input is 49 RAN)156.2325
In 159.0975
RAN 28NXDN48 EncryptedKNDN803

EMS Talk-around

EMS Talk-around frequencies for Dodge County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Dodge County EMSDodge County EMS – Alternate157.4500167.9 PLFMN—

Nearest trunked radio sites

Distances are measured from the center of Empire.

Simulcast · Houston County Government (GA)
RFSS 1 · Site 3 (hex 3) · NAC 143 · about 26 mi away
Control 854.7875, 855.2625, 855.5375, 855.9375
Voice 854.5625, 855.0125, 855.7375, 856.3375, 856.4625, 856.9375, 857.3125, 857.4375
Bibb County Simulcast · Central Georgia Interoperable Regional Radio System (CGIRRS)
RFSS 10 · Site 10 (hex A) · NAC 00A · about 40 mi away
Control 854.0625, 854.7125, 855.2375, 855.4875, 855.5875, 855.8875, 855.9875, 856.2375, 856.2625, 856.5875, 856.9875, 857.4875
Cordele · Crisp County Public Safety (P25)
Project 25 · RFSS 1 · Site 2 (hex 2) · NAC 940 · about 41 mi away
Control 856.7875, 857.3375
Voice 854.9375, 854.9625, 855.4625, 856.8125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What scanner do I need to listen to fire and EMS in Empire?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Empire?

For Empire, start with the Simulcast site of Houston County Government (GA). Its control channels are 854.7875, 855.2625, 855.5375, 855.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.