Skip to content

Mineral Bluff Fire and EMS Frequencies

We do not have frequencies listed specifically for Mineral Bluff in Fannin County, Georgia yet. Countywide channels for Fannin County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Habersham Co Simulcast (Northeast Georgia Area Regional Radio Network), about 45 miles away.

About Mineral Bluff Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Mineral Bluff: Fannin County Fire 154.4450 MHz, narrow FM, 127.3 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 3 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.

Data updated .

Fannin County channels that also cover Mineral Bluff

Fire Dispatch

Fire Dispatch frequencies for Fannin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fannin County FireFannin County Fire – Dispatch154.4450
In 154.0700
127.3 PLFMNWZJ515
Fannin County FireFannin County Fire – Dispatch154.4450
In 154.0700
RAN 50NXDN48WZJ515

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Fannin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fannin County FireFannin County Fire – Fire Ground154.3250127.3 PLFMNWZJ515
Fannin County FireFannin County Fire – Fire Ground – Future154.3250NXDN48WZJ515
Fannin County FireFannin County Fire – Fire Ground(FUTURE) Fire – Repeater156.1125
In 151.1900
NXDN48WZJ515
Fannin County FireFannin County Fire – Repeater156.1125
In 151.1900
FMNWZJ515

Fire Talk-around

Fire Talk-around frequencies for Fannin County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fannin County FireFannin County Fire – Operations46.1000FMWZJ515

Nearest trunked radio sites

Distances are measured from the center of Mineral Bluff.

Habersham Co Simulcast · Northeast Georgia Area Regional Radio Network
RFSS 10 · Site 10 (hex A) · NAC 125 · about 45 mi away
Control 854.5, 854.875, 856.225, 856.475, 856.875
Cherokee County Simulcast · Cobb Regional Radio System
RFSS 1 · Site 6 (hex 6) · NAC 176 · about 48 mi away
Control 852.35, 853.15, 853.475, 855.8625
Voice 852.925, 853.95, 858.4125
Forsyth County Simulcast · Cobb Regional Radio System
RFSS 1 · Site 7 (hex 7) · NAC 170 · about 48 mi away
Control 851.1, 851.65
Voice 852.6625, 852.8625, 853.275, 853.6, 853.9875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Mineral Bluff?

We do not have a fire dispatch channel listed specifically for Mineral Bluff. The county-level fire dispatch channels in the same county: Fannin County Fire 154.4450 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Mineral Bluff?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Mineral Bluff?

For Mineral Bluff, start with the Habersham Co Simulcast site of Northeast Georgia Area Regional Radio Network. Its control channels are 854.5, 854.875, 856.225, 856.475 MHz. Program a control channel first; the scanner finds the voice channels from it.