About Calvary Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Calvary: Grady County Fire 155.0850 MHz, narrow FM, CSQ.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Grady County channels that also cover Calvary
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grady County Fire | Grady County Fire – Dispatch (*Repeater) WPSI377 | 155.0850 | CSQ | FMN | WQQY682 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Grady County Fire | Grady County Fire – Fire Ground | 154.0775 | P25 | WQSU624 |
Nearest trunked radio sites
Distances are measured from the center of Calvary.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Calvary?
We do not have a fire dispatch channel listed specifically for Calvary. The county-level fire dispatch channels in the same county: Grady County Fire 155.0850 MHz, narrow FM, CSQ.
What scanner do I need to listen to fire and EMS in Calvary?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Calvary?
For Calvary, start with the Decatur/Grady Co. Simulcast site of Southwest Georgia Regional Radio System. Its control channels are 769.33125, 770.50625 MHz. Program a control channel first; the scanner finds the voice channels from it.