About Mountain Park Fire and EMS Frequencies
- Trunked radio systems that carry fire and EMS traffic here: Gwinnett County Public Safety (GA): 14 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Mountain Park, start with the Stone Mountain site of Stone Mountain Park P25, about 7 miles away. Its control channels: 857.0875, 857.6875, 858.0125 MHz.
- 14 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Gwinnett County channels that also cover Mountain Park
Gwinnett County Public Safety (GA)
14 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Gwinnett County Fire | Gwinnett County Fire – Dispatch | 10603 | 296b | D Encrypted |
| Gwinnett County Fire | GCFD FS EMS | 10605 | 296d | D Encrypted |
| Gwinnett County Fire | GCFD FS EMS | 10607 | 296f | D Encrypted |
| Gwinnett County Fire | Gwinnett County Fire – Tactical Channel | 10609 | 2971 | D Encrypted |
| Gwinnett County Fire | Gwinnett County Fire – Tactical Channel | 10611 | 2973 | D Encrypted |
| Gwinnett County Fire | Gwinnett County Fire – Tactical Channel | 10613 | 2975 | D Encrypted |
| Gwinnett County Fire | Gwinnett County Fire – Tactical Channel | 10615 | 2977 | D Encrypted |
| Gwinnett County Fire | Gwinnett County Fire – Tactical Channel | 10617 | 2979 | D Encrypted |
| Gwinnett County Fire | Gwinnett County Fire – Tactical Channel | 10619 | 297b | D Encrypted |
| Gwinnett County Fire | Gwinnett County Fire – Tactical Channel | 10621 | 297d | D Encrypted |
| Gwinnett County Fire | Gwinnett County Fire – Tactical Channel | 10623 | 297f | D Encrypted |
| Gwinnett County Fire | Gwinnett County Fire – Tactical Channel | 10625 | 2981 | D Encrypted |
| Gwinnett County Fire | Gwinnett County Fire – Administration | 10601 | 2969 | D Encrypted |
| Gwinnett County Fire | Gwinnett County Fire – Training | 11035 | 2b1b | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Mountain Park.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Mountain Park?
Yes. The county-level systems that cover Mountain Park are Fire and EMS talkgroups are listed for Gwinnett County Public Safety (GA): 14 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Mountain Park?
A trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Mountain Park?
For Mountain Park, start with the Stone Mountain site of Stone Mountain Park P25. Its control channels are 857.0875, 857.6875, 858.0125, 858.3375 MHz. Program a control channel first; the scanner finds the voice channels from it.