About Glenn Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Glenn: Heard County Fire 46.5800 MHz, narrow FM, no tone. Trunked: Western Area Regional Radio System Authority (WARRS), for example Heard County Fire talkgroup 5201 (hex 1451).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Western Area Regional Radio System Authority (WARRS): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Glenn, start with the Polk County Simulcast site of Cobb Regional Radio System, about 13 miles away. Its control channels: 770.30625, 771.35625 MHz.
Data updated .
Heard County channels that also cover Glenn
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Heard County Fire | Heard County Fire – Pagers | 46.5800 | FMN | KYF301 | |
| Heard County Fire | Heard County Fire – Dispatch | 154.4000 | 156.7 PL | FMN | WZX774 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Heard County Fire | Heard County Fire – Fire Ground | 154.2500 | FMN | WZX774 |
Western Area Regional Radio System Authority (WARRS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Heard County Fire | Heard County Fire – Dispatch | 5201 | 1451 | D |
| Heard County Fire | Heard County Fire – Tactical Channel | 5202 | 1452 | D |
| Heard County Fire | Heard County Fire – Tactical Channel – 2 HCFES Tactical 2] | 5203 | 1453 | D |
| Heard County Fire | Heard County Fire – Tactical Channel – 2 HCFES Tactical 3] | 5204 | 1454 | D |
| Heard County Fire | Heard County Fire – Administration | 5205 | 1455 | D |
Nearest trunked radio sites
Distances are measured from the center of Glenn.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Glenn?
We do not have a fire dispatch channel listed specifically for Glenn. The county-level fire dispatch channels in the same county: Heard County Fire 46.5800 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Glenn?
Yes. The county-level systems that cover Glenn are Fire and EMS talkgroups are listed for Western Area Regional Radio System Authority (WARRS): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Glenn?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Glenn?
For Glenn, start with the Polk County Simulcast site of Cobb Regional Radio System. Its control channels are 770.30625, 771.35625 MHz. Program a control channel first; the scanner finds the voice channels from it.