About Bemiss Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bemiss: Lowndes County Fire 154.2200 MHz, narrow FM, 210.7 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Lowndes County Public Safety P25 (Project 25): 7 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Bemiss, start with the Simulcast site of Lowndes County Public Safety P25, about 7 miles away. Its control channels: 854.8125, 856.4375, 856.7375 MHz.
- 7 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Lowndes County channels that also cover Bemiss
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lowndes County Fire | Fire/EMS Dispatch | 154.2200 | 210.7 PL | FMN | WNHT221 |
| Lowndes County Fire | Lowndes County Fire – Paging /Highway Department | 156.1800 | 71.9 PL | FMN | KNGC666 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Lowndes County EMS | Lowndes County EMS – Tactical Channel | 155.1750 | 107.2 PL | FMN | KGQ246 |
Lowndes County Public Safety P25
Project 25
7 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Lowndes County Fire | Fire Rescue Dispatch | 304 | 130 | D Encrypted |
| Lowndes County Fire | Fire/Rescue Tactical | 305 | 131 | D Encrypted |
| Lowndes County Fire | Fire/Rescue Tactical | 306 | 132 | D Encrypted |
| Lowndes County Fire | Fire/Rescue Tactical | 307 | 133 | D Encrypted |
| Lowndes County Fire | Moody Fire Tactical | 423 | 1a7 | D Encrypted |
| Lowndes County EMS | Lowndes County EMS – Dispatch | 400 | 190 | D Encrypted |
| Lowndes County EMS | Lowndes County EMS – Tactical Channel | 401 | 191 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Bemiss.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bemiss?
We do not have a fire dispatch channel listed specifically for Bemiss. The county-level fire dispatch channels in the same county: Lowndes County Fire 154.2200 MHz, narrow FM, 210.7 PL.
Do fire departments and EMS use a trunked radio system in Bemiss?
Yes. The county-level systems that cover Bemiss are Fire and EMS talkgroups are listed for Lowndes County Public Safety P25 (Project 25): 7 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Bemiss?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Bemiss?
For Bemiss, start with the Simulcast site of Lowndes County Public Safety P25. Its control channels are 854.8125, 856.4375, 856.7375, 856.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.