About Byron Fire and EMS Frequencies
Quick answer: Fire dispatch for Byron: Byron Fire 154.2350 MHz, narrow FM, no tone.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 3 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
- 3 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Byron conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Byron Fire | Byron Fire – Dispatch | 154.2350 | FMN | — |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Byron Fire | Byron Fire – Operations | 154.2350 | RAN 27 | NXDN48 Encrypted | — |
Peach County channels that also cover Byron
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Peach County Fire | Peach County Fire – Dispatch | 155.2350 In 150.7900 | 88.5 PL | FMN | WNYN797 |
| Peach County Fire | Peach County Fire – Dispatch | 159.3750 | RAN 49 | NXDN48 Encrypted | WQQA980 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Peach County Fire | Peach County Fire – Tactical Channel | 154.2050 | 67.0 PL | FMN | KNBW244 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Peach County EMS | Peach County EMS – Dispatch | 155.3250 | RAN 49 | NXDN48 Encrypted | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Peach County Hospital | EMS-to-Navicent Hospital of Peach County | 155.3400 | 88.5 PL | FMN | KNAW431 |
Nearest trunked radio sites
Distances are measured from the center of Byron.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Byron?
Fire dispatch channels listed for Byron: Byron Fire 154.2350 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Byron?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Byron?
For Byron, start with the Bibb County Simulcast site of Central Georgia Interoperable Regional Radio System (CGIRRS). Its control channels are 854.0625, 854.7125, 855.2375, 855.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Byron fire and EMS frequencies encrypted?
1 of the 2 conventional frequencies listed for Byron are marked encrypted; a scanner cannot decode encrypted audio.