Skip to content

Milstead Fire and EMS Frequencies

We do not have frequencies listed specifically for Milstead in Rockdale County, Georgia yet. Countywide channels for Rockdale County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Simulcast (Rockdale County Public Safety P25), about 3 miles away.

About Milstead Fire and EMS Frequencies

Quick answer: Trunked: Rockdale County Public Safety P25 (Project 25), for example Rockdale County Fire talkgroup 100 (hex 64).

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Rockdale County Public Safety P25 (Project 25): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Milstead, start with the Simulcast site of Rockdale County Public Safety P25, about 3 miles away. Its control channels: 855.5125, 855.5375, 856.1125 MHz.

Data updated .

Rockdale County channels that also cover Milstead

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Rockdale County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rockdale County FireRockdale County Fire – Fire Ground860.9875114 DPLFMN—

Rockdale County Public Safety P25

Project 25

Rockdale County Public Safety P25 talkgroups
AgencyDescriptionTalkgroupHexMode
Rockdale County FireRockdale County Fire – Dispatch10064D
Rockdale County FireRockdale County Fire – Tactical Channel10165D
Rockdale County FireRockdale County Fire – Tactical Channel10266D
Rockdale County FireRockdale County Fire – Tactical Channel10367D
Rockdale County FireRockdale County Fire – Tactical Channel10468D

Nearest trunked radio sites

Distances are measured from the center of Milstead.

Simulcast · Rockdale County Public Safety P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 541 · about 3 mi away
Control 855.5125, 855.5375, 856.1125, 856.5375, 857.5625
Voice 851.4875, 851.9125, 852.65, 853.575, 854.1625
Simulcast · Newton County P25 (GA)
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC B91 · about 12 mi away
Control 771.43125, 772.20625, 772.78125, 773.20625
Voice 770.30625, 770.78125
Stone Mountain · Stone Mountain Park P25
Project 25 · RFSS 1 · Site 1 (hex 1) · NAC 6A1 · about 15 mi away
Control 857.0875, 857.6875, 858.0125, 858.3375
Voice 851.9375, 853.7375, 856.6875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Milstead?

Yes. The county-level systems that cover Milstead are Fire and EMS talkgroups are listed for Rockdale County Public Safety P25 (Project 25): 5 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Milstead?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Milstead?

For Milstead, start with the Simulcast site of Rockdale County Public Safety P25. Its control channels are 855.5125, 855.5375, 856.1125, 856.5375 MHz. Program a control channel first; the scanner finds the voice channels from it.