About Phillipsburg Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Phillipsburg: Tift County Fire 154.1600 MHz, narrow FM, 162.2 PL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Tift County Public Safety P25 (Project 25): 5 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Phillipsburg, start with the Tifton site of Tift County Public Safety P25, about 1 miles away. Its control channels: 856.9625, 857.4875 MHz.
- 5 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Tift County channels that also cover Phillipsburg
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Tift County Fire | Tift County Fire – Dispatch (Simulcast from Trunked System) | 154.1600 In 150.8050 | 162.2 PL | FMN | WNYG565 |
| Tift County Fire | Tift County Fire/EMS / Tifton Fire – 800 Backup | 157.4700 In 160.0650 | 311 DPL | FMN | WPKY440 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Tift County Fire | Fireground Simplex | 852.1875 | 110.9 PL | FMN | — |
Tift County Public Safety P25
Project 25
5 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Tift County Fire | Tift County Fire – Dispatch | 113 | 71 | D Encrypted |
| Tift County Fire | Tift County Fire – Operations | 114 | 72 | D Encrypted |
| Tift County Fire | Tift County Fire – Operations | 115 | 73 | D Encrypted |
| Tift County Fire | Tift County Fire – Operations | 117 | 75 | D Encrypted |
| Tift County Hospital | EMS-to-Tift Regional Medical Center ER | 146 | 92 | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Phillipsburg.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Phillipsburg?
We do not have a fire dispatch channel listed specifically for Phillipsburg. The county-level fire dispatch channels in the same county: Tift County Fire 154.1600 MHz, narrow FM, 162.2 PL.
Do fire departments and EMS use a trunked radio system in Phillipsburg?
Yes. The county-level systems that cover Phillipsburg are Fire and EMS talkgroups are listed for Tift County Public Safety P25 (Project 25): 5 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Phillipsburg?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Phillipsburg?
For Phillipsburg, start with the Tifton site of Tift County Public Safety P25. Its control channels are 856.9625, 857.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.