Skip to content

Sautee-Nacoochee Fire and EMS Frequencies

We do not have frequencies listed specifically for Sautee-Nacoochee in White County, Georgia yet. Countywide channels for White County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Habersham Co Simulcast (Northeast Georgia Area Regional Radio Network), about 8 miles away.

About Sautee-Nacoochee Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Sautee-Nacoochee: White County Fire 152.5325 MHz, DMR, CC 15 · TG 154600 · SL 1.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.

Data updated .

White County channels that also cover Sautee-Nacoochee

Fire Dispatch

Fire Dispatch frequencies for White County
AgencyDescriptionFrequency (MHz)ToneModeFCC
White County FireFire/EMS Dispatch South Simulcast152.5325
In 157.7975
CC 15 · TG 154600 · SL 1DMRWQRK630
White County FireFire/EMS Dispatch North Simulcast152.5475
In 157.8075
CC 15 · TG 154600 · SL 1DMRWQRK630
White County FireFire/EMS Dispatch Analog Simulcast155.7150CSQFMNWNIJ945

Nearest trunked radio sites

Distances are measured from the center of Sautee-Nacoochee.

Habersham Co Simulcast · Northeast Georgia Area Regional Radio Network
RFSS 10 · Site 10 (hex A) · NAC 125 · about 8 mi away
Control 854.5, 854.875, 856.225, 856.475, 856.875
Baldwin · Banks County Government (GA)
Site 3 (hex 3) · about 16 mi away
Control 453.225
Voice 453.3375, 453.44375, 453.55625, 453.7625
Alto · Banks County Government (GA)
Site 8 (hex 8) · about 18 mi away
Control 453.64375
Voice 453.54375, 460.23125, 460.26875, 460.61875, 460.63125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Sautee-Nacoochee?

We do not have a fire dispatch channel listed specifically for Sautee-Nacoochee. The county-level fire dispatch channels in the same county: White County Fire 152.5325 MHz, DMR, CC 15 · TG 154600 · SL 1.

What scanner do I need to listen to fire and EMS in Sautee-Nacoochee?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.

What are the control channels for trunked radio in Sautee-Nacoochee?

For Sautee-Nacoochee, start with the Habersham Co Simulcast site of Northeast Georgia Area Regional Radio Network. Its control channels are 854.5, 854.875, 856.225, 856.475 MHz. Program a control channel first; the scanner finds the voice channels from it.