About Tyhee Fire and EMS Frequencies
Quick answer: Trunked: Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN), for example Bannock County Fire talkgroup 3500 (hex dac).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN): 11 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Tyhee, start with the Chinese Peak site of Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN), about 9 miles away. Its control channels: 773.58125, 774.18125, 774.88125 MHz.
Data updated .
Bannock County channels that also cover Tyhee
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bannock County Fire | Search & Rescue – Primary | 460.0500 In 465.0500 | FMN | WQV869 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Shoshone-Bannock Tribes Fire | Fire Operations | 155.4900 In 159.0600 | 123.0 PL | FMN | WNWK341 |
Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Bannock County Fire | South Cnty Fire/EMS(Poc Valley Fire) | 3500 | dac | D |
| Bannock County Fire | Pocatello Valley Fire | 3508 | db4 | D |
| Bannock County Fire | Fire/Sheriff Operations | 3713 | e81 | D |
| Bannock County Fire | Fire/Sheriff Operations | 3714 | e82 | D |
| Bannock County Fire | Fire/Sheriff Operations | 3715 | e83 | D |
| Bannock County Fire | Fire/Sheriff Operations | 3716 | e84 | D |
| Bannock County Fire | Fire/Sheriff Operations | 3717 | e85 | D |
| Bannock County Fire | Fire/Sheriff Operations (3727) | 3727 | e8f | D |
| Bannock County Fire | Fire/Sheriff Operations (3728) | 3728 | e90 | D |
| Bannock County EMS | Search & Rescue | 3900 | f3c | D |
| Bannock County Hospital | EMS/Hospital | 3901 | f3d | D |
Nearest trunked radio sites
Distances are measured from the center of Tyhee.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
Do fire departments and EMS use a trunked radio system in Tyhee?
Yes. The county-level systems that cover Tyhee are Fire and EMS talkgroups are listed for Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN): 11 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Tyhee?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Tyhee?
For Tyhee, start with the Chinese Peak site of Idaho Cooperative Agencies Wireless Interoperable Network (ICAWIN). Its control channels are 773.58125, 774.18125, 774.88125, 775.48125 MHz. Program a control channel first; the scanner finds the voice channels from it.